STEHLE RSK-nn-System circular saw 200 x 4.4 / 5.2 x 45 Z 36

Conical tooth undercut saw (KO-F) is an ideal undercut saw for horizontal panel saws. It will work well as a saw for wood-based panels - particleboard, MDF, HDF, plywood, etc. A special advantage is that the blade is also suitable for working in laminated panels, plastic laminate. Undercutter the width of the cut is adjusted by raising and lowering the saw. In brief. Machine/Application: Panel saws with undercutting unit. For undercutting plastic laminated panels Design: Special cavity geometry Toothing: "KO-F" trapezoidal teeth Blade material: HW TC04 plus Advantages: Quick adjustment Universal application Optimum cutting quality due to improved flatness accuracy Reduced undercutting depth Very low noise level Noise reduction of approximately 6 dB(A) when idle Ideal cutting quality for all common coatings High productivity and economic efficiency due to extended blade life Additional information: Height adjustable to main saw cut Undercut depth 1 mm = 0.21 mm wider than the main saw blade's kerf Optimum undercut depth 1.0 - 2.0 mm QUALITY OF CONSTRUCTION. Saw made to the highest quality standard offered by Stehle 3-0-1. Used for stationary machines. It will prove itself especially in industrial applications where tools are subjected to the highest loads. The laser-cut body and properly selected carbide will ensure the highest service life and high precision machining. Like saws made in the 2-0-6 quality standard, the design of the blade silences the operation of the saw. The brewing and quality control is done by machine and then, each piece is checked by a human which guarantees the highest quality saws. Regardless of the quality standard in which the saw is made, the coats of all are produced from hardened steel, which undergoes the hardening process already at the raw material supplier. Putting this process in the hands of professionaires guarantees the highest quality of the semi-finished product. Stehle is a guarantee of continuous operation and good cutting quality. QUALITY OF CUTTING MATERIAL. HW TC03 - tungsten carbide best suited and used in saws for cutting wood-based panels, composite materials, but also successfully used in processing solid wood or building materials. Gradation TC03 is the highest hardness grade at Stehle, giving a very long tool life.