STEHLE circular saw KKE 100 x 2.6 / 2 x 32 Z 30

A saw with a single-sided bevel tooth (left or right) (ES) will work best for cutting wood-based materials. It will also cut wood and plastics well. This model is intended for veneering machines. If you are looking for a saw for a veneering machine from Homag Powerline, Brandt or another manufacturer, then our Stehle KKE blade will be an interesting solution for you. Our catalog will tell you which saw is compatible with the veneering machines of which manufacturer. However, we recommend that you check the requirements in the specifications of your particular veneering machine when making a purchase. In brief. Machine/Application: Veneer trimmers Veneer trimmers For trimming thin veneers of plastic, veneer and solid wood Design: Special NoNoise interdental space geometry Positive, or negative rake angle With, or without, shear angle Serration: alternate "ES" teeth Blade material: HW TC06 Advantages: Very low noise level Noise reduction of approximately 6 db(A) when idle QUALITY OF CONSTRUCTION. Made to the highest quality standard offered by Stehle 3-0-1, this saw is used for stationary machines. It will prove itself especially in industrial applications where tools are subjected to the highest loads. The laser-cut body and properly selected carbide will ensure the highest service life and high precision machining. Like saws made in the 2-0-6 quality standard, the design of the blade silences the operation of the saw. The brewing and quality control is done by machine and then, each piece is checked by a human which guarantees the highest quality saws. Regardless of the quality standard in which the saw is made, the coats of all are produced from hardened steel, which undergoes the hardening process already at the raw material supplier. Putting this process in the hands of professionaires guarantees the highest quality of the semi-finished product. Stehle is a guarantee of continuous operation and good cutting quality. QUALITY OF CUTTING MATERIAL. TC06 - tungsten carbide best suited and used in saws for cutting wood-based panels, composite materials, but also successfully used in processing solid wood or building materials. This carbide gradation is a compromise between hardness and flexibility.