The saw with trapezoidal-flat toothing (TR-F) is a typical saw for vertical saws and table and format saws. It will work well as a cutting blade primarily for wood-based boards (particleboard, MDF, HDF, plywood) including as a saw for plastic-laminated boards. It can also be used for cutting materials (such as gypsum board, cement particle board, etc.). structural. Depending on the dimensions and number of teeth, the cutting quality will be good or rough. In brief. Machine/Application: Table saws Vertical panel saws For cutting plastic laminated panels to size Design: Toothing: trapezoidal-flat teeth "TR-F" Blade material: HW TC04 plus Advantages: Improved cutting quality due to optimized cutting geometry Noise reduction due to soundproofing laser cuts Additional information: Especially for plastic-laminated wood-based panels and high-pressure laminated panels QUALITY OF DESIGN. Saw made to the highest quality standard offered by Stehle 3-0-1. Used for stationary machines. It will prove itself especially in industrial applications where tools are subjected to the highest loads. The laser-cut body and properly selected carbide will ensure the highest service life and high precision machining. Like saws made in the 2-0-6 quality standard, the design of the blade silences the operation of the saw. The brewing and quality control is done by machine and then, each piece is checked by a human which guarantees the highest quality saws. Regardless of the quality standard in which the saw is made, the coats of all are produced from hardened steel, which undergoes the hardening process already at the raw material supplier. Putting this process in the hands of professionaires guarantees the highest quality of the semi-finished product. Stehle is a guarantee of continuous operation and good cutting quality. QUALITY OF CUTTING MATERIAL. HW TC03 - tungsten carbide best suited and used in saws for cutting wood-based panels, composite materials, but also successfully used in processing solid wood or building materials. Gradation TC03 is the highest hardness grade at Stehle, giving a very long tool life.