SPEEDTEC® 215C

This is a compact single-phase, multi-process inverter with tremendous capabilities, designed to perform MIG, MMA and TIG applications.

It is equipped with a color TFT display, making it easy to set the desired parameters.

Synergy module, helps select the optimal welding parameters based on material thickness, feed speed, or welding current. The SPEEDTEC® 215C is designed to handle a variety of welding applications: MIG, MMA or TIG, you can reach maximum power with 200A at 25% duty cycle and weld at 1.0mm solid wire and 1.1mm powder wire.

Guarantees excellent work for steel, high-alloy steels and aluminum. The machine works seamlessly with mixed gas shielding, argon and 100% CO2, as well as with self-shielding powder wire (Innershield® NR®-211-MP).

The machine can be used for all types of welding applications.

With an active PFC module, energy consumption is reduced by 30%

Note: the device is not equipped with a TIG chuck which must be purchased separately.

Main Features :

- Intelligent chassis: 15kg spool insertion capability, helpful shelves and storage compartments, 48% lighter weight than conventional MIG units

- Multi-tasking: synergistic and manual MIG, powder wire, MMA, TIG Lift

- Power Factor Correction (PFC). Better welding output performance with 30% lower power consumption (compared to conventional MIG equipment) = cost reduction, ability to work with a power generator

- Intuitive operation: color TFT display for easy selection of correct parameters

- Excellent arc quality. MIG: Infinitely adjustable voltage, wire feed speed, MMA: Hot Start and Arc Force Control, TIG: Lift TIG avoids tungsten contamination

- Handle space saves time and extends handle life

- Top shelf for quick access to accessories such as pliers, brush or spray

- Internal storage compartment for storing electrodes, gloves or electrode holder

- Ergonomic handle and light weight makes it easy to move the device

SPEEDTEC® 215C

This is a compact single-phase, multi-process inverter with tremendous capabilities, designed to perform MIG, MMA and TIG applications.

It is equipped with a color TFT display, making it easy to set the desired parameters.

Synergy module, helps select the optimal welding parameters based on material thickness, feed speed, or welding current. The SPEEDTEC® 215C is designed to handle a variety of welding applications: MIG, MMA or TIG, you can reach maximum power with 200A at 25% duty cycle and weld at 1.0mm solid wire and 1.1mm powder wire.

Guarantees excellent work for steel, high-alloy steels and aluminum. The machine works seamlessly with mixed gas shielding, argon and 100% CO2, as well as with self-shielding powder wire (Innershield® NR®-211-MP).

The machine is designed to work with mixed gas shielding, argon and 100% CO2, as well as with self-shielding powder wire (Innershield® NR®-211-MP).

With an active PFC module, energy consumption is reduced by 30%

Note: the device is not equipped with a TIG chuck which must be purchased separately.

Main Features :

- Intelligent chassis: 15kg spool insertion capability, helpful shelves and storage compartments, 48% lighter weight than conventional MIG units

- Multi-tasking: synergistic and manual MIG, powder wire, MMA, TIG Lift

- Power Factor Correction (PFC). Better welding output performance with 30% lower power consumption (compared to conventional MIG equipment) = cost reduction, ability to work with a power generator

- Intuitive operation: color TFT display for easy selection of correct parameters

- Excellent arc quality. MIG: Infinitely adjustable voltage, wire feed speed, MMA: Hot Start and Arc Force Control, TIG: Lift TIG avoids tungsten contamination

- Handle space saves time and extends handle life

- Top shelf for quick access to accessories such as pliers, brush or spray

- Internal storage compartment for storing electrodes, gloves or electrode holder

- Ergonomic handle and light weight makes it easy to move the device

PECHNICAL DATA:

• Power supply: 230V
.
• WELDING CURRENCY: 200A/24V@25%
.
• SURGE PROTECTOR: 16A
.
• CURRENT RANGE: 20-200A
.
• RANGE OF solid wire diameters (MM): 0.6-1.0 mm
.
• RANGE OF COREWORK DIMENSIONS (MM): 0.9-1.1 mm
.
• RANGE OF DRUTE FEEDING SPEED: 1-15 m/min
.
• WEIGHT OF DRUTE PULSE: 5-15 KG
• DIMENSIONS ( WXSXD): 780 mm x 400 mm x 750 mm
.
• NET WEIGHT: 42 kg
.