MAGNUM CUT 45 MMA plasma cutter BLOW BACK

The MAGNUM CUT 45 brand plasma cutter is designed for handheld air plasma cutting of electrically conductive parts made of: carbon and alloy steels, . aluminum and its alloys, . brass, copper and also cast iron . and MMA covered electrode welding. . The device is equipped with a torch that allows cutting in hard-to-reach places and in all possible positions. The cutting machine can be used in production processes, workshop work, repair work, etc.. The device is equipped with the "BLOW-BACK" non-contact arc ignition system. This method is based on the retraction of the electrode during arc ignition. The big advantage of this solution is less wear and tear on consumable components and minimization of electromagnetic interference, compared to HF ignition. This has a major impact on the protection of electrical equipment such as controllers, stepper motors, etc. An additional advantage is the lower failure rate of the device, by eliminating the HF module. The MAGNUM CUT 45 is built on the basis of the latest technology using IGBT transistors, which translates into reduced electromagnetic interference, low power loss, increased efficiency and reliability of the power source, and reduced power consumption. The cutter is equipped with overload thermal protection. It has the advantage of low weight and infinitely adjustable cutting current to ensure high quality cutting of the material. It has the following features. The MAGNUM CUT 45 brand plasma cutter is designed for handheld air plasma cutting of electrically conductive parts made of: carbon and alloy steels, . aluminum and its alloys, . brass, copper and also cast iron . and MMA covered electrode welding. . The device is equipped with a torch that allows cutting in hard-to-reach places and in all possible positions. The cutting machine can be used in production processes, workshop work, repair work, etc.. The device is equipped with the "BLOW-BACK" non-contact arc ignition system. This method is based on the retraction of the electrode during arc ignition. The big advantage of this solution is less wear and tear on consumable components and minimization of electromagnetic interference, compared to HF ignition. This has a major impact on the protection of electrical equipment such as controllers, stepper motors, etc. An additional advantage is the lower failure rate of the device, by eliminating the HF module. The MAGNUM CUT 45 is built on the basis of the latest technology using IGBT transistors, which translates into reduced electromagnetic interference, low power loss, increased efficiency and reliability of the power source, and reduced power consumption. The cutter is equipped with overload thermal protection. It has the advantage of low weight and infinitely adjustable cutting current to ensure high quality material cutting. TECHNICAL DATA: Cutting current: 20 - 45 A,. MMA welding current: 20-200A, Work cycle: 60%, Power supply: 230 V / 50Hz,. Power supply protection: 20A / C, Power consumption: 5.5 kVA, Approximate cutting thickness for structural steel: separating max. 14 mm, qualitative max. 9 mm,. Arc initiation: non-contact,. Function: 2T/4T,. Required air pressure: 5 bar, Air consumption: 115 l/min, Case protection: IP21S,. Cooling: Air - fan,. Idle voltage: 330 V, Net weight: 6.9 kg,.