Magnum Mig 210H Synergy kit #1

The MIG 210H SYNERGIA welder by MAGNUM is a lightweight, portable semi-automatic welding machine made with inverter technology, powered by 230V single-phase mains with a maximum welding current of 200A. It is equipped with a digital display and an intuitive, easy-to-use control panel, the synergy function used in the device allows you to quickly set the welding parameters.The MIG 210H has brazing capability. This is a process of joining metals intermediate between brazing and welding. The connection is achieved only by melting a special binder-copper-based solder (SG-CuSi3, SG-CuSn6 copper-based binder), without melting the metals to be joined, while the process technique and the method of preparing the edges of the objects to be joined are similar to those of welding. Benefit of brazing BALANCES OF THE DEVICE: - work in synergistic mode - operation in manual mode - welding of aluminum and soldering - inductance adjustment - spot welding - 2T/4T function - MMA welding - ARC FORCE / HOT START function - TIG LIFT weldingThe current source is built on the basis of the latest technology using IGBT transistors, which translates into reduced electromagnetic interference, low power loss, increased efficiency and reliability of the current source, and lower power consumption.The device has stepless adjustment of welding parameters, and is equipped with an overload thermal protection system to prevent overheating. The welder is equipped with a 2-roller wire feeder with a "euro connector" socket, which allows you to connect different types of welding fixtures. The welding machine is equipped with a 2-roller wire feeder with a "euro connector" socket, which allows you to connect different types of welding fixtures.The MIG 210H SYNERGIA welder by MAGNUM is a lightweight, portable semi-automatic welding machine made with inverter technology, powered by 230V single-phase mains with a maximum welding current of 200A. It is equipped with a digital display and an intuitive, easy-to-use control panel, the synergy function used in the device allows you to quickly set the welding parameters.The MIG 210H has brazing capability. This is a process of joining metals intermediate between brazing and welding. The connection is achieved only by melting a special binder-copper-based solder (SG-CuSi3, SG-CuSn6 copper-based binder), without melting the metals to be joined, while the process technique and the method of preparing the edges of the objects to be joined are similar to those of welding. Benefit of brazing BALANCES OF THE DEVICE: - work in synergistic mode - operation in manual mode - welding of aluminum and soldering - inductance adjustment - spot welding - 2T/4T function - MMA welding - ARC FORCE / HOT START function - TIG LIFT weldingThe current source is built on the basis of the latest technology using IGBT transistors, which translates into reduced electromagnetic interference, low power loss, increased efficiency and reliability of the current source, and lower power consumption.The device has stepless adjustment of welding parameters, and is equipped with an overload thermal protection system to prevent overheating. The welder is equipped with a 2-roller wire feeder with a "euro connector" socket, which allows you to connect different types of welding fixtures. The welder is equipped with a 2-roll wire feeder with a "euro connector" socket, which allows you to connect different types of welding fixtures. TECHNICAL DATA: Power supply: AC 230 [V], 50 [Hz],. Required protection: 20 [A]. Max power consumption: 6.4 [kVA]. Operating cycle: 60 [%] Idle voltage: 65 [V] MIG/MAG welding current: 40 - 200 [A]. MIG/MAG welding voltage: 16 - 24 [V]. TIG LIFT welding current: 10 - 200 [A]. MMA welding current: 10 - 180 [A] Maximum wire spool diameter: D200 [mm]. Wire diameter: 0.6/0.8/0.9/1.0 [mm]. Casing protection class: IP23. Weight: 12 [kg].