Magnum Mig 290 Automatic

MAGNUM MIG 290 AUTOMATIC is a professional inverter semi-automatic welding machine that allows MIG/MAG and MMA welding with a maximum current of 250A. The machine is equipped with a professional wire feeder4x4 and has space for 15kg spools, which significantly reduces operating costs. The device is equipped with a professional4x4 wire feeder and has space for 15kg spools, which significantly reduces operating costs.The current source is built on IGBT transistors to ensure a minimum of electromagnetic interference, enabling increased efficiency and reliability of the current source, lower power consumption, and instantaneous current adaptation to changes in parameters during welding.The welding machine is equipped with a 4x4 type four-roll feeder.The device has a polarity change mechanism. It allows you to connect classic welding leads and weld with covered electrode, turning the semi-automatic machine into an electrode welder. The machine is equipped with a polarity change mechanism. The 230V and 400V power supply allows you to work in long cycles without worrying about overheating or shutting down. MAGNUM MIG 290 AUTOMATIC is a professional inverter semi-automatic welding machine that allows MIG/MAG and MMA welding with a maximum current of 250A. The machine is equipped with a professional wire feeder4x4 and has space for 15kg spools, which significantly reduces operating costs. The device is equipped with a professional4x4 wire feeder and has space for 15kg spools, which significantly reduces operating costs.The current source is built on IGBT transistors to ensure a minimum of electromagnetic interference, enabling increased efficiency and reliability of the current source, lower power consumption, and instantaneous current adaptation to changes in parameters during welding.The welding machine is equipped with a 4x4 type four-roll feeder.The device has a polarity change mechanism. It allows you to connect classic welding wires and weld with covered electrode, turning the semi-automatic machine into an electrode welder. The machine is equipped with a polarity change mechanism. The 230V and 400V power supply allows you to work in long cycles without worrying about overheating or shutting downTechnical data: Power supply voltage: 400V / 230V Number of phases: 3ph Power frequency: 50Hz Current protection: 20A Maximum MIG/MAG power consumption: 8.8kVA. Maximum MMA power consumption: 9.2kVA MIG/MAG welding current range: 50-250A. MMA welding current range: 10-200A Work cycle: 60% Welding voltage: 15-29V Electrode diameter: 1.6-4.0mm. Wire diameter: 0.6-1.2mm. Fedder: 4-roll. Wire feed speed: 2.5-16m/min Max. spool size: D300 Max. spool weight: 15kg Protection degree: IP21S. Cooling: fan. Wymiary: 900x660x440mm Weight: 40kg.