Spartus EasyTig 200P

SPARTUS EasyTIG 200P AC/DC is a digitally-controlled, inverter welding machine, built on the basis of IGBT transistors and PWM technology. It allows welding with the methods: TIG AC/DC and MMA AC/DC. It is powered by single-phase 230V mains. The device gives the possibility of arc ignition in two methods TIG HF and TIG Lift. In addition, it has a built-in pulse current welding function, which is extremely useful when joining very thin parts. A simple function panel allows precise control of all the most important welding parameters. The modern display, with the help of a TIG function waveform chart, makes it easy to manage advanced parameters, such as:-pre-gas and post-gas - initial current, peak current and end current, - up slope and down slope, - AC frequency (with waveform adjustment), - AC balance (20 - 80%), - SPOT welding and during pulsed current welding: . - Pulse width ( 5-100%) - base current (10-200A) - pulse frequency (0.5 - 200Hz). Depending on the welder's preference, EasyTIG 200P AC/DC can operate in 2T or 4T mode. The MMA AC/DC covered electrode welding process is supported by the functions: Arc Force and Hot Start. The welder has 6 channels where you can set and save your own welding parameters in the device's memory.SPARTUS EasyTIG 200P AC/DC is a device designed and manufactured for field work. Despite its small size and weight, it allows for advanced TIG welding. Examples of applications: field repair work, workshop work, light construction, maintenance. . SPARTUS EasyTIG 200P AC/DC is a digitally-controlled, inverter welding machine, built on the basis of IGBT transistors and PWM technology. It allows welding with the methods: TIG AC/DC and MMA AC/DC. It is powered by single-phase 230V mains. The device gives the possibility of arc ignition in two methods TIG HF and TIG Lift. In addition, it has a built-in pulse current welding function, which is extremely useful when joining very thin parts. A simple function panel allows precise control of all the most important welding parameters. The modern display, with the help of a TIG function waveform chart, makes it easy to manage advanced parameters, such as:-pre-gas and post-gas - initial current, peak current and end current, - up slope and down slope, - AC frequency (with waveform adjustment), - AC balance (20 - 80%), - SPOT welding and during pulsed current welding: . - Pulse width ( 5-100%) - base current (10-200A) - pulse frequency (0.5 - 200Hz). Depending on the welder's preference, EasyTIG 200P AC/DC can operate in 2T or 4T mode. The MMA AC/DC covered electrode welding process is supported by the functions: Arc Force and Hot Start. The welder has 6 channels where you can set and save your own welding parameters in the device's memory.SPARTUS EasyTIG 200P AC/DC is a device designed and manufactured for field work. Despite its small size and weight, it allows for advanced TIG welding. Examples of applications: field repair work, workshop work, light construction, maintenance.Technical data. Supply voltage ~1× 230V ± 10% 50 / 60 Hz TIG welding current [A]. AC HF 10 - 200 / AC Lift 30 - 200 / DC 10 - 20 TIG duty cycle [%]. 35 TIG PARAMETERS Start current, end current Pre-gas [s] 0 - 1 Current ramp-up time [s] 0 - 5 Current falling time [s] 0 - 5 Post-gas [s] 0.1 - 10 Pulsation Pulse current [A]. [AC/DC] 10 - 200 Base current [A] [AC/DC] 10 - 200 Pulse width [%]. 5 - 100 Pulse frequency [Hz]. 0.5 - 200 AC frequency [Hz]. 40 - 250 AC balance [%]. 20 - 80 SPOT welding Arc striking LIFT / HF MMA PARAMETERS Welding with covered electrode MMA MMA welding current [A]. 10 - 200 MMA duty cycle [%]. 35% Hot Start adjustment range [%] 0 - 10 Arc Force adjustment range [%]. 0 - 10 Idling voltage [V] 60 OTHER PARAMETERS Current consumption [A] TIG 36 / MMA 43 Power factor (cosφ) 0.73 Efficiency η [%]. 85 Insulation class H Degree of protection IP21s Weight [kg]. 11 Dimensions [mm]. 490 × 225 × 340