TRAFILUX TRAFIMIG 285 S It is a professional inverter synergic semi-automatic welding machine, finding its application in welding low-carbon steel, low-alloy MAG, MIG alloy steel and aluminum alloys. In addition, it allows the use of self-shielding wires - cored wires for welding without additional shielding gas. The device provides the possibility of welding with covered electrodes - MMA function and welding in TIG LIFT mode. The migomat is designed to work in workshop and industrial conditions. The device can be used both indoors and outdoors indoors. Robust wheels with a brake system, provide stability when using large cylinders of shielding gas. The design advantage of the device is transistors made with IGBT technology. The characteristics of this type of transistors are, lower power consumption, less electromagnetic interference, with higher efficiency and a stronger and more stable welding arc. OPERATING MODES: MIG - MMA - TIG LIFT Synergy / Manual mode 2T/4T S4T - special 4t Spot - spot welding FLUX - Welding with powdered wires 4 roll feeder Variable polarity Synergy for wire diameters: 0,8-1,0 -1,2-1,6 Mixture: Co2/Mix Ar+Co2 Available function: PRG - Gas advance POG - Gas delay I I - Starting current value I 2 - Value of crater filling current U I - arc length of the starting current U 2 - arc length of the crater filling current BBT - Wire burning HS - Hot start adjustment for MIG/MMA/TIG lift RIN - Slow feeder start for MIG function IND - Inductivity adjustment ARL - Arc length adjustment for MIG function ANT - AntiStick for MMA function can be deactivated VRD - Reduction of idle voltage dld MMA function - deactivation possibility DP - Pulse frequency 0-5,0hz for model 300DUAL PULS Supply voltage AC380V±15%/50/60Hz Power consumption 8.5(KVA) Welding current 280(A)/16.5-29.0(V) MIG welding current range 30-280(A) MMA welding current range 30-250(A) Duty cycle 60(%) Idle voltage 52±2(V) Wire diameters 0.8-1.2(mm) Wire feed speed 2-18(m/min)Size 780×290×530(mm) Weight 33(KG) Degree of protection IP21 Protection required 20C(A)