GLOBUS ROTARY ANGLE MILL R=2.0 d=8 FT910

GLOBUS CNC HM ROUNDING MILL WITH UPPER BEARING PROMISE R=2.0 H=12.7 D=16.7 d=8 FT910-1608-0001Application:- rounding of soft and hard solid wood and wood-based materials (particleboard, mdf, hdf, osb, etc.)- used in the production of furniture, doors and stairs, where it is not possible to make parts with standard milling operations- milling cutters with bottom bearing allow the tool to be guided along the template placed under the milled material- used on milling machines- mounting of milling cutters in baskets: the possibility of using reduction sleeves of the shank part of the milling cutter, mount min. 2/3 of the height of the shank part of the cutter in the chuck of the milling machineFeatures:- open body profiles improve the quality of the machined surface - possibility to use higher feed rates, reduce cutting resistance, better chip removal- high quality carbide increases durability and life - higher tool performance- precise carbide grinding allows to achieve high smoothness of HM insert (low roughness) - this increases tool life and proves the high quality of carbide usedDimensions:Diameter ( D ): 16.7mmWorking height ( H ): 12.7mmShank diameter ( d ): 8mmRange (R): 2.0Number of teeth (Z): 2Rotation (RPM): RH. GLOBUS CNC HM ROUNDING MILL WITH UPPER BEARING PROMISE R=2.0 H=12.7 D=16.7 d=8 FT910-1608-0001Application:- rounding of soft and hard solid wood and wood-based materials (particleboard, mdf, hdf, osb, etc.)- used in the production of furniture, doors and stairs, where it is not possible to make parts with standard milling operations- milling cutters with bottom bearing allow the tool to be guided along the template placed under the milled material- used on milling machines- mounting of milling cutters in baskets: the possibility of using reduction sleeves of the shank part of the milling cutter, mount min. 2/3 of the height of the shank part of the cutter in the chuck of the milling machineFeatures:- open body profiles improve the quality of the machined surface - possibility to use higher feed rates, reduce cutting resistance, better chip removal- high quality tungsten carbide increases durability and service life - higher tool performance- precision grinding of the tungsten carbide allows to obtain high smoothness of the HM insert (low roughness) - this increases the service life of the tool and proves the high quality of the tungsten carbide usedDimensions:Diameter ( D ): 16.7mmWorking height ( H ): 12.7mmShank diameter ( d ): 8mmRange (R): 2.0Number of teeth (Z): 2Rotation (RPM): RH.