Your control displayed one of the symptoms listed below: F-01, F-02, F-03 errors appearing, Frequently occurring error F-06, 2, 4. unresettable error F-07, 5. occurrence of error F-12, 6. unresettable errors F-70 to F-B7, 7. occurrence of errors S-01, S-06, S-07, 8. persistent error S-77, S-80, 9. Unable to upload new program, 10. failure of RS User or Programming port, 11. cnc control operation hangs up. We have the solution! Our press brake parts range has been expanded to include the FMSC 3074/AMADA PLC unit and FMSC 3075/AMADA PLC unit, replacing the PILZ PSS PSS 3074 and PILZ PSS 3075. The PILZ PSS 3074 and PILZ PSS 3075 safety controllers were discontinued in 2010, and the manufacturer did not offer a replacement that would replace this controller 1:1, without interfering with the machine's wiring. To meet the needs of users of press brakes with the PILZ PSS 3074 and PILZ PSS 3075 controller, we offer a product that replaces the PILZ controller 100%. The FMSC controller is built with modules from Fiessler, a respected German manufacturer of safety automation. FMSC 3074/AMADA PLC and FMSC 3075/AMADA PLC: is a category 4 (PLe/SIL3) safety controller, built modularly in master/slave - during repair it is enough to replace a single defective module for self-assembly - the product has been constructed in such a way that the customer can easily put a new controller on the machine by himself, without replacing or interfering with the wiring on the machine - the installation of this controller is done by plugging in the plugs does not require reprogramming - the customer gets a ready-to-use product connection to the CNC control of the machine takes place automatically after connecting the controller, the controller has free inputs/outputs to which additional functions can be connected. FMSC meets standards: SIL3 (PN-EN 62061) and PLe (PN-EN ISO 13849), in accordance with the Machinery Directive 2006/42/EC, dated 21.10.2008. designed for press brakes from manufacturers such as AMADA, DURMA, BYSTRONIC, SMD and others. We offer two mounting options: Self-assembly - based on the sent instructions. Installation of PLC FMSC 3074/ AMADA and PLC FMSC 3075/AMADA is only a few minutes of work. We remove the controller, located on the machine, in its place we install a new PLC, plugging in the plugs according to the markings. Your control displayed one of the symptoms listed below: F-01, F-02, F-03 errors appearing, Frequently occurring error F-06, 2, 4. unresettable error F-07, 5. occurrence of error F-12, 6. unresettable errors F-70 to F-B7, 7. occurrence of errors S-01, S-06, S-07, 8. persistent error S-77, S-80, 9. Unable to upload new program, 10. failure of RS User or Programming port, 11. cnc control operation hangs up. We have the solution! Our press brake parts range has been expanded to include the FMSC 3074/AMADA PLC unit and FMSC 3075/AMADA PLC unit, replacing the PILZ PSS PSS 3074 and PILZ PSS 3075. The PILZ PSS 3074 and PILZ PSS 3075 safety controllers were discontinued in 2010, and the manufacturer did not offer a replacement that would replace this controller 1:1, without interfering with the machine's wiring. To meet the needs of users of press brakes with the PILZ PSS 3074 and PILZ PSS 3075 controller, we offer a product that replaces the PILZ controller 100%. The FMSC controller is built with modules from Fiessler, a respected German manufacturer of safety automation. FMSC 3074/AMADA PLC and FMSC 3075/AMADA PLC: is a category 4 (PLe/SIL3) safety controller, built modularly in master/slave - during repair it is enough to replace a single defective module for self-assembly - the product has been constructed in such a way that the customer can easily put a new controller on the machine by himself, without replacing or interfering with the wiring on the machine - the installation of this controller is done by plugging in the plugs does not require reprogramming - the customer gets a ready-to-use product connection to the CNC control of the machine takes place automatically after connecting the controller, the controller has free inputs/outputs to which additional functions can be connected. FMSC meets standards: SIL3 (PN-EN 62061) and PLe (PN-EN ISO 13849), in accordance with the Machinery Directive 2006/42/EC, dated 21.10.2008. designed for press brakes from manufacturers such as AMADA, DURMA, BYSTRONIC, SMD and others. We offer two mounting options: Self-assembly - based on the sent instructions. Installation of PLC FMSC 3074/ AMADA and PLC FMSC 3075/AMADA is only a few minutes of work. We remove the controller, located on the machine, in its place we install a new PLC, plugging in the plugs according to the markings. Technical data Parameters of the FMSC 3074/3075 controller 24V DC power supply Safety inputs: 48 High-speed inputs: 100 kHz Safety outputs: 14 Transistor outputs: 9 Output shutdown speed: 0.5ms Output parameters: 24V DC (nom 2A max 6 A) Communication interface: RS232/485 Programming interface: MICRO USB Ready to work with Akas, Lazer Safe and Sick curtain security systems