MAGNUM THF 238 PRO AC/DC ALU ZEST TIG-MMA welder

The THF 238 AC/DC PRO inverter device is based on the latest, most advanced technology. The devices are equipped with a "soft" clear panel for setting all necessary welding functions such as start/crater fill/weld/base current, current rise and fall times, gas discharge before and after welding, pulse frequency, balance and others. The THF 238 AC/DC PRO inverter device is based on the latest, most advanced technology. The devices are equipped with a "soft" clear panel for setting all necessary welding functions such as start/crater fill/weld/base current, current rise and fall times, gas discharge before and after welding, pulse frequency, balance and others. THF 238 AC/DC PRO provides excellent performance in welding aluminum and its alloys, carbon steel, stainless steel, titanium, etc. Inverter TIG welder THF 238 PRO AC/DC - equipped with the necessary wiring. The device is dedicated to work in repair and production workshops. Ideal for repairing aluminum rims, air conditioning tubes and welding stainless steel railings. The device is fully digitally controlled, has a soft touch panel so that the welder can freely and accurately set the working parameters The price of the device with a set of TIG\ MMA accessories: TIG 26 welding gun with remote control in the handle MMA electrode cable ground wire CO REDUCER MINI MAGNUM SHADOW PANORAMA visor with grinding function 4 sesnors !!! The visor is made of the highest quality materials, perfectly protects you from the harmful consequences of welding. Available in as many as four colors, so that each customer can match it to his individual needs and preferences. The automatic welding visor is equipped with a welding filter, which has the ability to change the degree of darkening. The filter before welding is transparent, so the welder has the opportunity to accurately observe the work area. When an electric arc is established, the filter will immediately darken. When the arc goes out the filter will become transparent again. The visor operator has the possibility to change the darkening in a smooth range of 5-13 DIN (depending on the model - see the data table). MAGNUM automatic welding visor provides complete protection against UV/IR (ultraviolet/infrared) radiation, even when the filter is brightened. The visor is powered by solar cells and replaceable batteries. The automatic welding visor is equipped with four photo-sensors. In addition, the visor is made of thermo-stable, wear-resistant polymer into which welding spatter does not melt. New 8L cylinder filled with AR The cylinders and valves are brand new. Painted according to the Polish Standard. Cylinders filled. Very light and efficient. Cylinders and valves meet the standard EN 1964-1 Legalization 10 years. 1 kg of LSI wire 5 ? 2,4 They are designed for all kinds of welding work in locksmith workshops, repair shops, industrial workshops, factories, automotive industry, services, etc. They make it possible to make connections, any weldable elements, for example, made of aluminum, copper, stainless steel and many others. TECHNICAL PARAMETERS: Single-phase power supply 230V Digital parameter display 2-takt and 4-takt functions for TIG welding Lots of TIG functions: TIG AC, TIG DC, TIG AC PULSE, TIG DC PULSE. TIG HF - contactless welding arc ignition All TIG parameters: gas before, starting current, welding current rise time, welding current, base current, welding current fall time, final welding current, pulse frequency, pulse width, AC balance, AC frequency, etc. Waveform adjustment MMA welding with electrodes with diameters of 1.6 - 4.0 mm (Arc Force, Hot Start, VRD, Anti Stick) IGBT technology Built-in memory TIG Point The TIG Point function is a variation of TIG (DC) spot welding. It does not set the point welding time only the interval time between each point. The point welding time is only one pulse (one short incident). For example, we set a welding current of 150 amps and a time of 2 seconds. We press and do not release the button on the TIG handle. There is one 150 amp pulse (ignites and goes out) and another pulse after 2 seconds and another every 2 seconds until the button on the TIG handle is released. Pulse time (spot welding) - not adjustable. Pulse intensity - adjustable over the full range of welding current for DC TIG. Interval (gap) time - adjustable from 0 to 2 seconds in 0.1 [s] increments and from 2 to 10 seconds in 0.5 [s] increments. Bi Level The Bi Level function allows you to switch between two different welding current values without interrupting the welding process. This is a great convenience when making continuous welds on material of variable thickness, or in general in cases where the welder needs to "jump" to a higher or lower welding current, without extinguishing the arc and interrupting the welding process. Using the Bi Level function, TIG DC and TIG AC can be welded. The function cannot be used PULSE. The process flow in the Bi Level function is very similar to TIG welding in 4T, that is, you can set the gas discharge time, initial current Ip, rise time tn, two different welding currents Ib and Is (you can switch between them), fall time to, end current Ik and gas discharge after welding. In addition, we set the exit (end) time from the process r.For example, we set the current Ib to 50 amperes, the current Is to 100 amperes, the time r- to 4 seconds. Press and hold the button - Ib current of 50 amperes will appear, release the button - Is current of 100 amperes will appear, press the button Ib current will appear. If you press and release the button at first, Is current will appear, press and hold the button - Ib current will appear. If the button is pressed for longer than the set time r then welding will stop. If the press is shorter than the set time r then the process continues. That is: 1. button pressed at the beginning - there is current Ib for any time until the button is released. 2. button released - there is Is current for any time. 3. button pressed for less than the set time r is the Ib current and when the button is released it will switch to Is which lasts until the next press 4. if pressed for as long as the set time r then the arc will be extinguished. TECHNICAL PARAMETERS Power supply: ~1x230V ±10% 50Hz Welding methods: TIG AC, TIG DC, TIG AC Puls, TIG DC Puls, MMA Net weight: 10kg TIG WELDING PARAMETERS Welding range: TIG AC 5-200A / TIG DC 5-200A Pulse base current AC balance: 10% to +99% Adjustment of current pulsation frequency, when TIG PULSE welding Adjustment range for TIG DC: 0.5 ÷ 999[Hz]. Adjustment range for TIG AC: 50÷ 250 [Hz]. Arc initiation: TIG HF / TIG Lift Waveform adjustment: MMA WELDING PARAMETERS: MMA welding current adjustment Arc Force, Hot Start, Anti Stick VRD Application: TIG manual welding of aluminum and its alloys TIG manual welding of copper and its alloys- TIG manual welding of alloy steels also stainless steels manual TIG welding of ordinary and higher strength structural steels manual welding with covered electrodes of ordinary and higher strength structural steels manual welding with covered electrodes of cold and hot cast irons- manual welding with covered electrodes of alloyed steels also stainless steels for semi-professional and professional use