MAGNUM MIG/MAG 240 DUAL PULSE SYNERGY KIT

The MAGNUM MIG 240 DUAL PULS SYNERGIA device is a lightweight portable semi-automatic welding machine powered by 230V single-phase mains with a maximum welding current of 240A. The MIG 240 welder is designed primarily for welding materials made of stainless steel and aluminum as well as low-carbon, low-alloy and high-alloy steels. The offered device is made using inverter technology with a microcontroller MCU (integrated microprocessor system). It is equipped with a large easy-to-read LED display and an intuitive, easy-to-use control panel, which allows you to quickly set all the most important welding parameters. The welder has single and double PULSE function, synergistic control. AVAILABLE WELDING METHODS:- MIG - MIG-MAG synergic welding- MIG PULS - single-pulse synergic welding,- MIG 2-PULS - double-pulse synergic welding,- TIG LIFT DC- TIG LIFT / TIG LIFT welding with pulse,- MMA - with covered electrodes (rutile, basic, acid). FUNCTIONS TO EASE WELDING:- Inductance - optimizes the arc characteristics depending on the thickness of the material to be welded. This function is useful when MIG/MAG welding thin parts - it prevents them from burning out (the thinner the part, the inductance should be higher). Inductance affects the shape of the weld, its width, the depth of fusion and the amount of spatter,- 2t double-bar - pressing the button initiates the gas flow and welding current, releasing the button turns off the welding current and gas flow- 4t quad-bar - pressing and releasing the handle button initiates the gas flow and welding current, pressing and releasing the button again turns off the welding current and gas outflow,- S-2T - special two-bar with HOT Start and final current (crater filling),- S-4T - special four-bar with HOT Start and final current (crater filling),- Synergy - automatically selects the welding parameters, when adjusting the voltage, the wire feed speed is automatically selected, The current source is built on the basis of the latest technology using IGBT transistors, which translates into reduced electromagnetic interference, low power loss, increased efficiency and reliability of the current source, and significantly affected the reduction of energy consumption. The device has a stepless adjustment of welding parameters, is equipped with an overload thermal protection system to prevent excessive overheating. The welder is characterized by a wide range of applications, it is dedicated to all kinds of welding work in locksmith shops, repair shops, etc. TECHNICAL DATA:- Power supply: AC 230 [V], 50 [Hz],- Required protection: 25 [A] class C- Efficiency: 200/60 [%]- Weight of wire spool: max: 5 [kg]- Wire diameter: 0.8/1.0/1.2 [mm] - Enclosure protection class: IP21S - Weight: 16.4 [kg]. MIG/MAG welding PARAMETERS:- MIG/MAG welding current: 30 - 240 [A]- MIG/MAG welding voltage: 16.5 - 24 [V]. TIG LIFT/MMA WELDING PARAMETERS: - MMA welding current: 30 - 200 [A]- Idle voltage: 56 [V] SET INCLUDES: MIG 240 DUAL PULS machine, MIG/MAG holder, Electrode holder, Mass holder Feeder rollers, User's manual mini pressure regulator , handle spare parts Welding gloves Anti-scratch cases New 8l cylinder filled with CO2/AR Painted according to the Polish Standard. Cylinders filled. Very light and efficient. Cylinders and valves meet the standard EN 1964-1 Legalization 10 years. MAGNUM NOVA welding visor The visor is made of the highest quality materials, perfectly protects against the harmful consequences of welding. It is available in four colors, so that each customer can match it to his individual needs and preferences. The automatic welding visor is equipped with a welding filter that has the ability to change the degree of darkness. The filter before welding is transparent, so the welder has the opportunity to observe the work area accurately. When an electric arc is established, the filter immediately darkens. When the arc dies out, the filter becomes transparent again. The visor operator has the ability to change the darkness in the range of 5-13 DIN (depending on the model - see the data table). MAGNUM automatic welding visor provides complete protection against UV/IR (ultraviolet/infrared) radiation, even when the filter is brightened. The visor is powered by solar cells and replaceable batteries. The automatic welding visor is equipped with two or four photo-sensors (depending on the model). In addition, the visor is made of thermo-stable, wear-resistant polymer, into which welding spatter does not melt. 5 kg of welding wire sg2/ 0.8 The MAGNUM MIG 240 DUAL PULS SYNERGIA device is a lightweight portable semi-automatic welding machine powered by 230V single-phase mains with a maximum welding current of 240A. The MIG 240 welder is designed primarily for welding materials made of stainless steel and aluminum as well as low-carbon, low-alloy and high-alloy steels. The offered device is made using inverter technology with a microcontroller MCU (integrated microprocessor system). It is equipped with a large easy-to-read LED display and an intuitive, easy-to-use control panel, which allows you to quickly set all the most important welding parameters. The welder has single and double PULSE function, synergistic control. AVAILABLE WELDING METHODS:- MIG - MIG-MAG synergic welding- MIG PULS - single-pulse synergic welding,- MIG 2-PULS - double-pulse synergic welding,- TIG LIFT DC- TIG LIFT / TIG LIFT welding with pulse,- MMA - with covered electrodes (rutile, basic, acid). FUNCTIONS TO EASE WELDING:- Inductance - optimizes the arc characteristics depending on the thickness of the material to be welded. This function is useful when MIG/MAG welding thin parts - it prevents them from burning out (the thinner the part, the inductance should be higher). Inductance affects the shape of the weld, its width, the depth of fusion and the amount of spatter,- 2t double-bar - pressing the button initiates the gas flow and welding current, releasing the button turns off the welding current and gas flow- 4t quad-bar - pressing and releasing the handle button initiates the gas flow and welding current, pressing and releasing the button again turns off the welding current and gas outflow,- S-2T - special two-bar with HOT Start and final current (crater filling),- S-4T - special four-bar with HOT Start and final current (crater filling),- Synergy - automatically selects the welding parameters, when adjusting the voltage, the wire feed speed is automatically selected, The current source is built on the basis of the latest technology using IGBT transistors, which translates into reduced electromagnetic interference, low power loss, increased efficiency and reliability of the current source, and significantly affected the reduction of energy consumption. The device has a stepless adjustment of welding parameters, is equipped with an overload thermal protection system to prevent excessive overheating. The welder is characterized by a wide range of applications, it is dedicated to all kinds of welding work in locksmith shops, repair shops, etc. TECHNICAL DATA:- Power supply: AC 230 [V], 50 [Hz],- Required protection: 25 [A] class C- Efficiency: 200/60 [%]- Weight of wire spool: max: 5 [kg]- Wire diameter: 0.8/1.0/1.2 [mm] - Housing protection class: IP21S - Weight: 16.4 [kg]. MIG/MAG WELDING PARAMETERS:- MIG/MAG welding current: 30 - 240 [A]- MIG/MAG welding voltage: 16.5 - 24 [V]. TIG LIFT/MMA WELDING PARAMETERS: - MMA welding current: 30 - 200 [A]- Idle voltage: 56 [V] SET INCLUDES: MIG 240 DUAL PULS machine, MIG/MAG holder, Electrode holder, Mass holder Feeder rollers, User's manual mini pressure regulator , handle spare parts Welding gloves Anti-scratch cases New 8l cylinder filled with CO2/AR Painted according to the Polish Standard. Cylinders filled. Very light and efficient. Cylinders and valves meet the standard EN 1964-1 Legalization 10 years. MAGNUM NOVA welding visor The visor is made of the highest quality materials, perfectly protects against the harmful consequences of welding. It is available in four colors, so that each customer can match it to his individual needs and preferences. The automatic welding visor is equipped with a welding filter that has the ability to change the degree of darkness. The filter before welding is transparent, so the welder has the opportunity to observe the work area accurately. When an electric arc is established, the filter immediately darkens. When the arc dies out, the filter becomes transparent again. The visor operator has the ability to change the darkness in the range of 5-13 DIN (depending on the model - see the data table). MAGNUM automatic welding visor provides complete protection against UV/IR (ultraviolet/infrared) radiation, even when the filter is brightened. The visor is powered by solar cells and replaceable batteries. The automatic welding visor is equipped with two or four photo-sensors (depending on the model). In addition, the visor is made of thermo-stable, wear-resistant polymer, into which welding spatter does not melt. 5 kg of welding wire sg2/ 0.8