TIG MMA welder MAGNUM THF 238 PRO-X AC DC ALU + set 1

The THF238 PRO-X AC/DC from MAGNUM is a professional, lightweight inverter welder designed for TIG HF (non-contact arc ignition) AC and DC welding. The THF 238 provides excellent performance in welding aluminum and its alloys, unalloyed steel, low-alloy steel, high-alloy steel, titanium and other weldable metals and alloys. The device can also be used for MMA welding with fusible covered electrodes. The THF 238 PRO welder is powered by a single-phase 230V mains, and has a high 60% duty cycle at 200 A, which allows it to be used in various industrial segments. The device has an intuitive, easy-to-use control panel, which allows quick and precise selection of individual welding parameters. The control panel is equipped with a multifunction display showing the values of individual parameters, which are adjusted with a single knob. ADVANTAGES OF THE WELDER Soft digital control panel WELDING CURRENT 10 - 200A/60%? Waveform selection for AC welding AC/DC welder TIG POINT function 2/4Takt function Designed for professional use Easy to operate even for amateurs BiLEVEL function Welding with PULSE Infinitely adjustable welding current Welding of ALUMINIUM Welding of stainless steel IGBT transistors LCD display Easy to use The THF238 PRO-X AC/DC from MAGNUM is a professional, lightweight inverter welder designed for TIG HF (non-contact arc ignition) welding with AC and DC welding. The THF 238 provides excellent performance in welding aluminum and its alloys, unalloyed steel, low-alloy steel, high-alloy steel, titanium and other weldable metals and alloys. The device can also be used for MMA welding with fusible covered electrodes. The THF 238 PRO welder is powered by a single-phase 230V mains, and has a high 60% duty cycle at 200 A, which allows it to be used in various industrial segments. The device has an intuitive, easy-to-use control panel, which allows quick and precise selection of individual welding parameters. The control panel is equipped with a multifunction display showing the values of individual parameters, which are adjusted with a single knob. The welder is characterized by a wide range of applications, it is dedicated to all kinds of welding work in factories, industrial plants, locksmith shops, repair shops, etc. Application: manual TIG welding of aluminum and its alloys manual TIG welding of copper and its alloys-manual TIG welding of alloy steels including stainless steels manual TIG welding of ordinary and higher strength structural steels manual welding with covered electrodes of ordinary and higher strength structural steels manual welding with covered electrodes of cold and hot cast iron- manual welding with covered electrodes of alloyed steels, also stainless steels for semi-professional and professional use The current source is built on the basis of IGBT (Insulated Gate Bipolar Transistor) transistors, which provide a minimum of electromagnetic interference, low power loss in the basic circuits, allowing to increase the efficiency and reliability of the current source. Very high efficiency, which translates directly into lower power consumption, and high switching frequency, provide instant adjustment of current to changes in parameters during welding. TECHNICAL DATA: Power supply: AC 230 [V], 50/ [Hz], Required protection: 25 [A] / C Power consumption: 7 [kW]. Efficiency: 60 [%]. Idling voltage Uo: 70 [V] TIG AC welding current: 10 - 200 [A]. DC TIG welding current: 10 - 200 [A]. MMA welding current: 10 - 200 [A] Adjustment - current rise / fall time: 0 - 10 [s]. Adjustment - gas discharge time after welding 0 - 10 [s]. Housing protection class: IP23 Weight: 10 [kg]. The price of the device with a set of accessories TIG MMA TIG 26 welding gun ground wire spare parts for the handle Gas cable Reducer with rotameter Welding angles 12 Kg x2 pcs. Welding gloves TIG gold tungsten electrode 1.6/2.0/2.4 mm - 3 pcs. TIG welding wire 1.6mm for black steel - 0.5 kg. TIG welding wire 1.6mm 308LSi for stainless steel - 0.5 kg TIG welding wire 1.6mm ALMG - 0.5 kg Magnum Turbo TRUE COLOR visor The digital function panel allows precise control of all the most important weldingparameters for TIG AC/DC methods: TIG process flow chart, Waveform selection for TIG AC welding - sine wave, rectangular wave, AC balance, AC current frequency, Bi-LEVEL - ability to switch between two welding current values Gas discharge before welding, Starting current, Current rise time, Welding current, Current falling time, End (blanking) current, Gas discharge after welding TIG PULSE: peak current, base current, pulse frequency, pulse width 2T/4T operation mode TIG Lift contact arc ignition TIG HF, TIG Punkt - spot welding Parameters for MMA methods Welding current intensity, Hot start (Hot Start) - easier electrode ignition, Arc Force - stabilizes the welding arc and eliminates short circuits, easier welding in forced positions. The visor is made of the highest quality materials, perfectly protects against the harmful consequences of welding. It is available in as many as four colors, so that each customer can match it to his individual needs and preferences. Perfect for any amateur welder how professional. The automatic welding visor is equipped with a welding filter, which has the ability to change the degree of darkening. The filter is transparent before welding, so the welder has the opportunity to observe the work area accurately. When an electric arc is established, the filter will immediately darken. When the arc goes out the filter will become transparent again. The visor operator has the ability to smoothly change the darkening in the range of 5-13 DIN. MAGNUM automatic welding visor provides complete UV/IR (ultraviolet/infrared) protection, even when the filter is brightened. The visor is powered by solar cells and replaceable batteries. The automatic welding visor is equipped with four photo-sensors. In addition, the visor is made of thermo-stable, wear-resistant polymer, into which welding spatter does not melt.Basic functions: - grinding - low battery indication - regulation of brightening time - blackout adjustment PARAMETERS Field of view [mm]: 100 x 60 Number of sensors: 4 Blackout [DIN]: 5-8; 9-13 Response time [s]: 1/30000 Minimum amperage for TIG [A]: 10 Grinding function: yes Power supply: photocell + replaceable battery Battery type: 2x CR2450 Battery test: yes Internal filter size [mm]: 100 x 63,5 External filter size [mm]: 104 x 115