Semi-automatic TECNOMIG 200 PULSE LCD 230V Aluminum

The TECNOMIG 200P PULSE is an inverter synergistic semi-automatic welding machine designed for MIG/MAG, MMA, TIG Lift arc welding, and brazing of galvanized sheets. The device is designed for use in professional use. The device has three synergistic MIG/MAG welding modes: MIG, MIG PULS, MIG DOUBLE PULS. TECNOMIG 200P PULSE is used for welding aluminum and its alloys, stainless steel, carbon and low-alloy steels, and brazing of galvanized sheets. Welding is carried out in a shield of inert gas, active gas or a mixture, depending on the program selected on the control panel. Set the parameters manually or select one of 52 synergic MIG/MAG programs for welding : AlMg, AlSi, Al99.5, CuSi3, CuAl9, 308LSi, 316LSi and FE. By using MIG pulsation, there is an increase in the amount of heat introduced into the welded part. It is possible to obtain a better weld, regardless of the welding position, and to reduce the amount of spatter. With both MIG and MIG PULS methods, we have the option to choose the function of the button in the handle between Spot , 2-takt, S2-takt, 4-takt (button lock for long welds) and S4-takt operation. The TECNOMIG 200P PULSE is an inverter synergistic semi-automatic welding machine designed for MIG/MAG, MMA, TIG Lift arc welding, and brazing of galvanized sheets. The device is designed for use in professional use. The device has three synergistic MIG/MAG welding modes: MIG, MIG PULS, MIG DOUBLE PULS. The TECNOMIG 200P PULSE is used for welding aluminum and its alloys, stainless steel, carbon and low alloy steels and brazing of galvanized sheets. Welding is carried out in a shield of inert gas, active gas or a mixture, depending on the program selected on the control panel. Set the parameters manually or select one of 52 synergic MIG/MAG programs for welding : AlMg, AlSi, Al99.5, CuSi3, CuAl9, 308LSi, 316LSi and FE. By using MIG pulsation, there is an increase in the amount of heat introduced into the welded part. It is possible to obtain a better weld, regardless of the welding position, and to reduce the amount of spatter. With both MIG and MIG PULS methods, we have the option to choose the function of the button in the handle between Spot , 2-takt, S2-takt, 4-takt (button lock for long welds) and S4-takt operation. ADVANTAGES OF THE DEVICE EURO 3M welding chuck 3-in-1 welder: MIG-MAG, MMA, TIG LIFT DC WELDING CURRENT 28-200 A Synergistic parameter control 52 programs PULSE and Double PULSE function Device prepared for welding aluminum Low weight and mobility of the device Spot welding SET READY FOR WELDING Memory of welding parameters 35 records Possibility of welding without gas Synergy program for: aluminum, black steel, stainless steel, brazing, core wires Possibility of manual settings Welding without gas - FLUX Inductance adjustment less splatter Spot welding Brazing CUSI3 Easy and smooth adjustment of welding parameters Easily readable LCD panel 2T and 4T function ARC FORCE function Robust metal 4 roll feeder Clear and easy to use LCD display allows you to accurately adjust MIG welding parameters such as : inductance adjustment Current rise and fall adjustment Initial and final current adjustment Burn-in and wire feed adjustment Pulsed voltage (peak) adjustment Pulse frequency and pulse cycle adjustment Adjustment of gas discharge time before and after welding? adjustment of spot weld time and interval between successive welds adjustment of frequency, cycle and pulse current in TIG LIFT Overload protection. Inductance adjustment The welder also has functions to facilitate the process of MMA welding with covered electrode: MMA PULSE: HOT START: ANTI STICK: VRD (Voltage Reduction Device) function -. LUTOSWING IGBT Synergy 2T/4T FCAW PULSE WELDING MODE (PULSE and DOUBLE PULSE). For MIG welding, two pulse welding modes are also possible - single pulse (PMIG) and double pulse (DUAL). The important differences, however, are the different working parts in the chuck and feeder. To do this, first of all, you need to replace the feeder roll with one properly adapted under aluminum to the welding chuck, the wire spiral should be replaced with a Teflon insert In addition, after sliding the gas nozzle out of the pipe of the chuck, the current tip located there should be replaced with a suitable one for welding aluminum. Equipment Delivery includes a device with a professional welding chuck MIG 24 with a length of 3 meters armed under aluminum, electrode cable with a length of 2 meters, ground wire with a length of 2 meters, wire feed rollers 1.0-1.2 for aluminum and 0.8-1.0 for steel red spiral for welding steel consumable elements of the welding chuck brush brush hose connector 8 mm for connecting the gas pipe New 8l cylinder filled with CO2/AR Painted according to the Polish Standard. Cylinders filled. Very light and efficient. Cylinders and valves meet the standard EN 1964-1. Legalization 10 years , replaceable cylinders and each distributor. Welding wire Sg2 0,8/5 KG Anti-splinter SPRAY Welding gloves Mini reducer Welding visor APS 510G 2 welding angles 12 Kg Device parameters Mains protection: C25A Rated supply voltage: 230 V; 50Hz (1ph) Power: 6.5 kW Idle voltage: 71 V / 13 V (VRD) Maximum current: 200 A Current at 100% operation: 160 A Current at 60% operation: 200 A (MIG) / 180 A (TIG/MMA) Aluminum wire diameter: 0.8 - 1.2 mm Diameter of soldering wire: 0.8 mm Diameter of self-stripping wire: 0.8 - 1.0 mm Diameter of steel wire: 0.6 - 1.0 mm Stainless steel wire diameter: 0.6 - 1.0 mm Welding electrode diameter: 1.6 - 4.0 mm Welding current adjustment range: 28 - 200 A (MIG) / 16 - 200 A (MIG PULSE) / 5 - 200 A (TIG/MMA) Wire spool size: D100 (0.45kg and 1kg), D200 (2kg and 5kg) Degree of protection: IP 23S Weight of the device / set: 12.5 / 16kg Overall dimensions L x W x H: 510x230x370 mm Package dimensions L x W x H:550x250x385 mm Plasma cutting: MIG/MAG ; MMA: Grinding: TIG, minimum current: >10A Response time: