Migmoat Ideal TECNO MIG 221 SYNERGIA Cart.

The TECNOMIG 221 SYNERGIC is an inverter semi-automatic welding machine designed for MIG/MAG, MMA, TIG LIFT and FLUX arc welding. The machine is designed for a wide range of applications: from maintenance work to auto body repair. The TECNOMIG 221 has synergy programs for welding carbon and low-alloy steels, and allows welding stainless steel and aluminum in manual mode. Welding is carried out with inert, active or mixed gas, and in reverse polarity without gas. When using the MIG method, we can choose the function of the button in the handle between 2T (no button lock) / 4T (button lock for long welds) operation. The TECNOMIG 221 SYNERGIC is an inverter semi-automatic welding machine designed for MIG/MAG, MMA, TIG LIFT and FLUX arc welding. The machine is designed for a wide range of applications: from maintenance work to auto body repair. The TECNOMIG 221 has synergy programs for welding carbon and low-alloy steels, and allows welding stainless steel and aluminum in manual mode. Welding is carried out with inert, active or mixed gas, and in reverse polarity without gas. When using the MIG method, we can choose the function of the button in the handle between 2T (no button lock) / 4T (button lock for long welds) operation. ADVANTAGES OF THE DEVICE EURO 3M welding gun READY-TO-USE SET 3-in-1 welder: MIG-MAG, MMA, TIG LIFT DC TIG LIFT WELDING CURRENT 50-200 A The device can weld aluminum Low weight and mobility of the device Possibility of manual settings Welding without gas - FLUX Adjustment of inductance less spatter Brazing CUSI3 Easy and smooth adjustment of welding parameters Easily readable LCD panel 2T and 4T function ARC FORCE function HOT START function Welding cart Large and easy-to-read LED display allows you to control and adjust welding parameters in real time. The device is equipped with inductance adjustment in MIG/MAG mode and HOT START and ARC FORCE adjustments in MMA method VRD (Voltage Reduction Device) function - reduces the idle state rest voltage on the electrode to a safe value. Provides electric shock safety when working in humid environments. Physical parameters The device has a fan-cooling system which dramatically increases its efficiency. The device is equipped with overload protection, which increases its reliability. 2T/4T - with two-touch, when you press the start button, the welding process occurs when you let go of the button, the welding process stops - with four-touch, when you first press and let go of the button, the welding process occurs when you press the button a second time, this is more convenient for longer welds. FCAW - the possibility of welding with cored wire without the use of a gas cylinder. The wire itself (FLUX) is filled with a substance that produces gases during welding. Adjustable inductance - allowing less heat to be introduced into the welding area. The sheet metal does not deform and the protective zinc layer is not damaged, useful in soldering. BUTOSWELDING - is a method that is quite similar to MIG/MAG welding, but the energy supplied in this case is much less. This makes solder welding used for joining thin zinc-coated sheets. The method described is a welding process, during which the solder, not the material you are working with, is melted. The second part of the name, MIG/MAG, comes from the use of the method of melting the wire in an electric arc surrounded by a protective gas, as well as preparing the edge of the material in the same way as for traditional welding. However, the brazing method is used not only to weld galvanized sheet metal, but also thin sheets made of stainless steel and dissimilar joints, including acid-resistant steel with ordinary steel or copper with steel. Synergy is a function of MIG/MAG welding machines, which allows automatic selection of welding parameters, choosing the type of material to be welded, wire diameter, shielding gas and welding current or material thickness, and the device automatically selects the appropriate welding parameters from these settings, we can make slight adjustments. The VRD (Voltage Reduction Device) function reduces the output voltage (between ground and electrode) to a safe level, protecting against accidental electrocution in between welding. The VRD voltage reduction system provides additional safety for the welder and those nearby, especially in environments where there is an increased likelihood of electrocution, e.g.: hot environments, humid environments, etc. HOT START (hot start) - a function which makes it much easier to start welding. At the moment of arc ignition, the welding current is briefly increased. This leads to the heating of the material and the electrode at the point of contact, as well as the appropriate formation of the fusion and the weld face (in the initial phase of the welding process). ARC FORCE - a function that provides the best settings to achieve a stable arc and a low amount of spatter. In other words, with ARC FORCE, the electric arc required for welding glows in a steady manner, without short circuits that hinder or prevent the joining of materials. Welding often produces large amounts of spatter, or droplets of molten metals, which must be removed. When the ARC FORCE function is activated, the amount of spatter is significantly reduced, and this allows for more comfortable work. IGBT - the welder uses modern transistors, a solution that ensures a minimum of electromagnetic interference low power losses in the basic circuits, allowing to increase the efficiency and reliability of the current source. TIG LIFT To do this, switch to the TIG position. Connect the current plug of the TIG welding handle to the "minus" socket (marked with the "-" symbol) and the ground handle to the "plus" socket (marked with the "+'' symbol). Then plug the gas and control plugs into the corresponding sockets. Place the non-fusible electrode in the body of the TIG holder. The terminal of the ground wire closes the circuit and should be clipped at a reasonably close but collision-free distance from the welding area (in the case of greater or too close distance, there is a possibility of accidental detachment of the terminal!). Then connect the power plug to the single-phase power supply (230V, 50Hz) and turn on the welder with the ON/OFF button. After the completed steps, the device is ready to work Equipment Delivery includes the device with: MIG 15 welding chuck with a length of 3 meters ground wire with a length of 2 meters, electrode cable with a length of 2 meters wire feed roller 0.8 - 1.0 for steel. Operating elements of the holder Gas wire Hammer brush Welding mask Hose spigot 8 mm for connecting the gas hose New 8l cylinder filled with CO2/AR Painted according to the Polish Standard. Cylinders filled. Very light and efficient. Cylinders and valves meet the standard EN 1964-1. Legalization 10 years , replaceable cylinders and each distributor. Welding wire Sg2 0,8/5 KG Anti-splinter SPRAY Welding gloves Mini reducer Welding visor APS 510G 2 welding angles 12 Kg IDEAL universal cart 4-wheel,3 shelves Welding visor ASP 510 APS welding visors with variable DIN 4/9-13 degree of protection, variable brightening time and adjustable sensitivity of sensors.Designed for MIG/MAG, TIG and TIG PULSE and MMA welding, equipped with grinding function.High-quality LCD filters in optical class 1/1/1/2.Power source: photovoltaic cell + replaceable battery.4-arm adjustable headpiece provides comfort.Shell compliant with EN175B for greater impact resistance. Plasma cutting: MIG/MAG ; MMA: Grinding: TIG, minimum current: >10A Response time: