Hot air soldering station 720W - 75W, compressor YH-992D+ ND PUMP The WEP 992D+ ND soldering station is a 2-in-1 soldering station for: - Hot air, used for desoldering and soldering electronic circuits such as BGA, SMD and etc. Blowing in the station is achieved with a compressor. - More powerful mainsail flask with a peak power of 72-75W (original Japanese-made Hakko heating element) WEP 992D+ ND soldering station is suitable for soldering and desoldering electronic components like SOIC, CHIP, QFP, PLCC, BGA, SMD, tid (especially cell phones). The station is used for soldering and desoldering electronic components, shrinking, welding plastics, heating. The WEP 992D+ ND soldering iron is a hot air soldering station and a soldering tip. The station is equipped with a PID microprocessor, which checks the station's operating parameters in 20ms cycles and corrects them to the set values. The values of temperature, airflow power, operating mode, are visible on a large easy-to-read LCD display, which greatly facilitates the work. The hotair soldering iron is equipped with a ceramic heating element, which heats up quickly and evenly. The heater is made of hard alloys, allowing long working time at high temperatures, while not deforming, this greatly increases the stability of the work and extends the life of the heater. Choosing the automatic operation mode, when you put the hot flask down on the stand, the device will automatically stop heating and cool down to a safe temperature. This will ensure long, trouble-free operation of the heating element, save electricity and ensure the safety of service. Features: - 3 working programs. The soldering station has the ability to store 3 work programs for hot air and flask. Depending on the type of work assembly, disassembly, set the appropriate program. - Hot air operation in automatic/manual mode. Choosing the automatic operation mode, when you put the hot air flask on the stand, the device will automatically stop heating and cool down to a safe temperature. This will ensure long, trouble-free operation of the heating element, save electricity and ensure the safety of service. Choosing the manual mode, when we often need to solder something, then we save time and increase the efficiency of work. It is recommended before finishing work, to switch to automatic mode. - Temperature correction function. It depends on the working environment, the efficiency of the heating element, the power of the blowing, the consumption of the mainsheet, all this affects the appropriate temperature correction to obtain the set parameter. - Operation in C/F mode. Possibility to set on the display in which units the temperature will be displayed. - Sleep function for the mains soldering iron. The soldering iron is equipped with a sleep mode, when the flask is not used, after a pre-set time in the range of 0-99min it goes into sleep mode, i.e. the flask is heated to a temperature of 200C, this prevents excessive oxidation of the mainsail, and this affects its life and the heating element. We have the option to disable the mode by setting 0. - A mainsail flask with a heating element that heats up quickly, maintains a stable temperature and is electrostatically safe. Selected parameters: - voltage: 220-240 V - power consumption: 720W - working environment from 0 to 50°C - compact design with easy to read LCD display - PID controller - microprocessor control of parameters: temperature, blowing power, operating time, temperature correction - protection against reaching too high temperature and informing with an alarm. - possibility to save 3 working programs (temperature, blowing power) - Cooling function - F/C temperature display mode Hot air station: - air flow source: compressor - air flow: up to 28 L/min - infinitely adjustable temperature over the entire range. - temperature range: 100-480°C - temperature stability: ±1°C - display type: LCD - cable length in the flask: up to 90cm - manual / automatic operation mode - protection against reaching too high temperature and informing by alarm. - displays actual blowing power Cob soldering iron: - temperature range: 200-480°C - temperature stability: ±1°C - peak power: 72-75W - display type: LCD - resistance to ground less than to 2om - potential to ground less than to 2mV - system: ESD safe - flask cable length: up to 100cm - sleep mode: activated after idle 0-99 minutes. Included: - WEP 992D+ ND soldering station - hotair flask stand - nozzle set: - round nozzle with a diameter of 2.5 mm - round nozzle with a diameter of 4.4 mm - circular nozzle with a diameter of 6 mm - round nozzle with a diameter of 9 mm - square nozzle 12x12 mm - arrowhead flask stand with cleaning sponge - 908I arrowhead flask with T-B blade - chip picker - power cord Hot air soldering station 720W - 75W, compressor YH-992D+ ND PUMP The WEP 992D+ ND soldering station is a 2-in-1 soldering station for: - Hot air, used for desoldering and soldering electronic circuits such as BGA, SMD and etc. Blowing in the station is achieved with a compressor. - More powerful mainsail flask with a peak power of 72-75W (original Japanese-made Hakko heating element) WEP 992D+ ND soldering station is suitable for soldering and desoldering electronic components like SOIC, CHIP, QFP, PLCC, BGA, SMD, tid (especially cell phones). The station is used for soldering and desoldering electronic components, shrinking, welding plastics, heating. The WEP 992D+ ND soldering iron is a hot air soldering station and a soldering tip. The station is equipped with a PID microprocessor, which checks the station's operating parameters in 20ms cycles and corrects them to the set values. The values of temperature, airflow power, operating mode, are visible on a large easy-to-read LCD display, which greatly facilitates the work. The hotair soldering iron is equipped with a ceramic heating element, which heats up quickly and evenly. The heater is made of hard alloys, allowing long working time at high temperatures, while not deforming, this greatly increases the stability of the work and extends the life of the heater. Choosing the automatic operation mode, when you put the hot flask down on the stand, the device will automatically stop heating and cool down to a safe temperature. This will ensure long, trouble-free operation of the heating element, save electricity and ensure the safety of service. Features: - 3 work programs. The soldering station has the ability to store 3 work programs for hot air and flask. Depending on the type of work assembly, disassembly, set the appropriate program. - Hot air operation in automatic/manual mode. Choosing the automatic operation mode, when you put the hot air flask on the stand, the device will automatically stop heating and cool down to a safe temperature. This will ensure long, trouble-free operation of the heating element, save electricity and ensure the safety of service. Choosing the manual mode, when we often need to solder something, then we save time and increase the efficiency of work. It is recommended before finishing work, to switch to automatic mode. - Temperature correction function. It depends on the working environment, the efficiency of the heating element, the power of the blowing, the consumption of the mainsheet, all this affects the appropriate temperature correction to obtain the set parameter. - Operation in C/F mode. Possibility to set on the display in which units the temperature will be displayed. - Sleep function for the mains soldering iron. The soldering iron is equipped with a sleep mode, when the flask is not used, after a pre-set time in the range of 0-99min it goes into sleep mode, i.e. the flask is heated to a temperature of 200C, this prevents excessive oxidation of the mainsail, and this affects its life and the heating element. We have the option to disable the mode by setting 0. - A mainsail flask with a heating element that heats up quickly, maintains a stable temperature and is electrostatically safe. Selected parameters: - voltage: 220-240 V - power consumption: 720W - working environment from 0 to 50°C - compact design with easy to read LCD display - PID controller - microprocessor control of parameters: temperature, blowing power, operating time, temperature correction - protection against reaching too high temperature and informing with an alarm. - possibility to store 3 working programs (temperature, blowing power) - Cooling function - F/C temperature display mode Hot air station: - air flow source: compressor - air flow: up to 28 L/min - infinitely adjustable temperature over the entire range. - temperature range: 100-480°C - temperature stability: ±1°C - display type: LCD - cable length in the flask: up to 90cm - manual / automatic operation mode - protection against reaching too high temperature and informing by alarm. - displays actual blowing power Cob soldering iron: - temperature range: 200-480°C - temperature stability: ±1°C - peak power: 72-75W - display type: LCD - resistance to ground less than to 2om - potential to ground less than to 2mV - system: ESD safe - flask cable length: up to 100cm - sleep mode: activated after idle 0-99 minutes. Included: - WEP 992D+ ND soldering station - hotair flask stand - nozzle set: - round nozzle with a diameter of 2.5 mm - round nozzle with a diameter of 4.4 mm - circular nozzle with a diameter of 6 mm - round nozzle with a diameter of 9 mm - square nozzle 12x12 mm - arrowhead flask stand with cleaning sponge - 908I arrowhead flask with T-B blade - chip picker - power cord