Welder Migomat TECNOMIG 205 LCD MIG/TIG/MMA Gloves.

Migomat TECNOMIG 205 LCD MIG/TIG/MMATECNO MIG 205 LCD MIG/TIG/MMA SYNERGICS Microprocessor-controlled inverter semi-automatic welding machine for MIG-MAG, brazing, FLUX, TIG Lift and MMA welding. Welding current 200A (MIG), 150A (TIG/MMA). 230V power supply. Welding wire diameter. 0.6-1.0mm. Wire feeder 2-roller. SynergyTechnical parameters TECNOMIG 205 LCD SYNERGIC is an inverter synergy semi-automatic welding machine designed for MIG/MAG, TIG LIFT, MMA and FLUX arc welding. The machine is designed for a wide range of applications: from maintenance work to auto body repair. The TECNOMIG 205 LCD is used for brazing galvanized sheet metal, welding stainless steel, carbon and low-alloy steels and aluminum . Welding is carried out under the cover of inert gas, active gas or mixture and in reverse polarity without gas. Quick synergistic adjustment of welding parameters via LCD display makes the device very easy to use. Migomat TECNOMIG 205 LCD MIG/TIG/MMATECNO MIG 205 LCD MIG/TIG/MMA SYNERGICS Microprocessor-controlled inverter semi-automatic welding machine for MIG-MAG, brazing, FLUX, TIG Lift and MMA welding. Welding current 200A (MIG), 150A (TIG/MMA). 230V power supply. Welding wire diameter. 0.6-1.0mm. Wire feeder 2-roller. SynergyTechnical parameters TECNOMIG 205 LCD SYNERGIC is an inverter synergy semi-automatic welding machine designed for MIG/MAG, TIG LIFT, MMA and FLUX arc welding. The machine is designed for a wide range of applications: from maintenance work to auto body repair. The TECNOMIG 205 LCD is used for brazing galvanized sheet metal, welding stainless steel, carbon and low-alloy steels and aluminum . Welding is carried out under the cover of inert gas, active gas or mixture, and in reverse polarity without gas. Quick synergistic adjustment of welding parameters via LCD display makes the device very easy to use. All you have to do is set the thickness of the material to be welded and start welding: the intelligent and automatic welding arc control system will, step by step, select the best parameters, for each welding position and for each material. The user can also set the welding arc length manually and adjust the appearance of the weld to suit his needs. BENEFITS of the TECNOMIG 205 LCD: Built-in synergy programs for welding: steel, stainless steel and aluminum, soldering and FLUX Possibility of manual and synergistic settings Brazing capability Welding current of 35-200A Inductance adjustment 2-takt 4-takt function SPOT WELDING FLUX welding Fan walking system Unit powered at 230V TIG LIFT handle can be used ATC function controls heat to some extent and reduces distortion of thin materials. Clear intuitive panel for selection of welding parameters Burn Back - adjustment of wire burning time, POST GAS- setting of gas discharge after welding Robust metal FEEDER Small dimensions and high mobility of the device Quick synergistic adjustment of welding parameters via LCD display makes the device very easy to use. The LCD display allows accurate adjustment of welding parameters such as : welding voltage wire feed speed inductance adjustment wire travel wire burning in gas discharge after welding Functions that make welding easier Inductance control - allows to reduce the amount of heat in the welding area. The sheet metal does not deform and the protective layer of tin is not damaged, a function used in soldering. Higher inductance (soft arc) results in a wider welding pool and fewer spatters . In contrast, lower inductance produces a stable, focused arc. BUTOSWELDING - MIG/MAG brazing has adopted a name formed from two different technologies. Brazing as a welding process, in which there is no melting of the parent material only of the solder, and MIG/ MAG welding technology, from which the preparation of the edges of the material as for welding and the method of melting the wire in an electric arc in an atmosphere of protective gases, fed automatically from a spool, were used. Brazing could, therefore, be called welding brazing. The protective gas used is usually pure argon In the welding process, evaporating zinc is the cause of porosity in the welds, as the high temperatures generated in this area destroy the protective layer, the joined parts lose their corrosion resistance. Mechanical removal of zinc before welding as well as reapplication in places where evaporation has occurred is a very expensive process. Filling cavities with zinc preparations ( paints) insufficiently protects the structure from corrosion. In addition, it should be noted that when welding galvanized sheets, there is a very high emission of zinc fumes that are harmful to health. These inconveniences can be avoided by using MIG/ MAG brazing technology. Two-takt 2t - pressing the button initiates gas discharge and welding current, pressing the button turns off the welding current, Four-bar 4t - pressing and releasing the handle button initiates gas discharge and welding current, pressing and releasing the button again turns off the welding current, IGBT - the welder uses modern transistors, a solution that provides a minimum of electromagnetic interference low power loss in the basic circuits, allowing to increase the efficiency and reliability of the current source. ATC function - for thin parts made of aluminum alloys advanced heat control function. The ATC function stabilizes the electric arc and reduces the peak value of the welding current, reducing the amount of heat transferred to the material. As a result, it makes welding thin aluminum parts much easier, and results in less material distortion, less overheating and a narrow heat affected zone. Feeder access speed adjustment, Burn Back - adjustment of wire burning time, POST-GAS - adjustment of gas discharge after welding, Spot Welding - spot welding, with adjustable spot welding time, available with Puls MIG welding. The price of the device with a set of MIG/ MMA accessories: welding chuck 15/3 m ground wire with clamp MMA electrode cable power cord with 230V plug Consumable elements of the holder Welding gloves Welding shield Brushbrush PHYSICAL PARAMETERS Wire spool size: 0.45 - 5 kg Degree of protection: IP 23S Weight of device / set: 15/16 kg Overall dimensions L x W x H: 540x240x385 mm TECHNICAL PARAMETERS Power: 6.4 kW Idle voltage: 64 V Maximum current: 200 A (MIG) / 150 A (TIG/MMA) Current at 100% operation: 160 A (MIG) Current at 60% operation: 200 A (MIG) Aluminum wire diameter: 0.8 - 1.0 mm Diameter of soldering wire: 0.8 - 1.0 mm Diameter of self-stripping wire: 0.8 - 1.2 mm Diameter of steel wire: 0.6 - 1.0 mm Stainless steel wire diameter: 0.8 - 1.0 mm Welding electrode diameter: 1.6 - 3.2 mm Welding current adjustment steps: Stepless Welding current adjustment range: 35 - 200 A (MIG) / 20 - 150 A (MMA/TIG) POWER SUPPLY PARAMETERS Current drawn from the mains: 20,3 A Mains protection: 25C Rated supply voltage: 230 V; 50Hz (1ph)