Hydraulic metal band saw with swing frame BMBS 230 x 280 HA

For cutting tubes and solid materials made of stainless steel and tool steelStepless band speed adjustmentPrecise and durable band guides with adjustable HM platesLonger saw life due to 25° inclination of the saw armEfficient coolant supply to the saw belt guidesSaw controlBRP stops the saw frame feed due to chips in the cutting channel, if the saw belt motor is subjected to too much stress; once the chips are removed by the running saw belt, the feed is automatically resumedElectromechanical saw tension control, in case of deviation, a microswitch shuts down the machineChip cleaning brush for optimum cleaning and maintenance of the sawHow the semi-automatic works: Automatic clamping of the workpiece after the start of the cutting cyclePerformance of the saw cut at the selected band speedIndependent stopping of the lowering and sawing motion at the lower end positionIndependent return of the saw arm to the upper end position The overhang opens automaticallyThe operator only needs to move the materialNational equipment: Stepless belt speed adjustmentSchnittantasterCooling systemRP saw belt tension monitorSaw belt tension monitorChip removal brushRotating control panelNavis with quick release device For bevel cuts from + 60° to -45°, HA version fully hydraulic with semi-automatic machine For cutting tubes and solid materials made of stainless steel and tool steelInfinitely adjustable belt speedPrecise and robust belt guides with adjustable HM platesLonger saw life due to 25° inclination of the saw armEfficient coolant supply to the saw belt guidesSaw controlBRP stops the saw frame feed due to chips in the cutting channel, if the saw belt motor is subjected to too much stress; once the chips are removed by the running saw belt, the feed is automatically resumedElectromechanical saw tension control, in case of deviation, a microswitch shuts down the machineChip cleaning brush for optimum cleaning and maintenance of the sawHow the semi-automatic works: Automatic clamping of the workpiece after the start of the cutting cyclePerformance of the saw cut at the selected band speedIndependent stopping of the lowering and sawing motion at the lower end positionIndependent return of the saw arm to the upper end position The overhang opens automaticallyThe operator only needs to move the materialNational equipment: Stepless belt speed adjustmentSchnittantasterCooling systemRP saw belt tension monitorSaw belt tension monitorChip removal brushRotary control panelNavis with quick release device. Dimensions and weights. Length (product) approx.: 1860. Width/depth (product) approx.: 1050. Height (product) approx.: 1890. Weight (net) approx: 420Equipment. Coolant pump: Belt tension monitoring: electromechanical. Belt feed monitoring: Saw feed: hydraulic. Saw return stroke: hydraulic. Cutting probe: Control panel: swivel. Cutting chips: Vice: with quick clamping device. Electrical data. Drive motor power: 1.5Power voltage: 400Power frequency: 50. Machine data. Saw belt speed (s): 20 - 100Speed levels: stepless. Saw band length: 2720. Saw band width: 27Saw band thickness: 0.9. Cutting area. Cutting range 0° round (pipe): 230Cutting range 0° round (solid material): 230Cutting range 0° rectangular lying (hollow profile): 280 x 220Cutting range 0° beam (tube): 280 x 120Cutting range -45° circular (pipe): 190Cutting range -45° round (solid material): 190Cutting range -45° horizontal rectangular (hollow profile): 180 x 170Cutting range -60° circular (pipe): 120Cutting range -60° circular (solid material): 120Cutting range -60° horizontal rectangular (hollow profile): 120 x 90Cutting range +45° circular (pipe): 185Cutting range +45° circular (solid material): 185Cutting range +45° horizontal rectangular (hollow profile): 180 x 120Material feed. Material Feed Table Height: 795