MIGMMA 2in1 PRAKTIK 200 IDEAL MIGOMAT welder

MIGMMA 2in1 PRAKTIK 200 IDEAL MIGOMAT welder The PRAKTIK MIG 200 Synergy single-phase powered semi-automatic welding machine made with IGBT inverter technology for MIG/MAG (gas shielded) or FLUX (non-gas shielded) welding and welding with direct current (DC) covered electrodes.Designed for welding with 0.6-1.0 mm welding wires, 0.9 mm self-shielded wires, and covered electrodes up to 4 mm in diameter of low-carbon steel, low-alloyed steel (MAG), alloyed steel (MIG), aluminum and cast iron.Max spool 5 kg D200.The PRAKTIK MIG 200 semi-automatic machine has: display of welding current parameters LED indicator lights: (green) overload (red) electronically controlled infinite welding current adjustment electronically controlled infinite wire feed speed adjustment quick wire feed button overload protection. Designed for workshop and field work. ONE OF THE MOST SELECTED HOME & WORKHOUSE APPLIANCES. ADVANTAGES OF THE DEVICEWelding Handle 2.2m Welding current 30-.200 A Manual parameter adjustment INDUCTIVITY REGULATION FLUX WELDING Low weight and mobility of the device Space for gas cylinderPossibility to weld without gasClear and easy-to-use control panel. PHYSICAL PARAMETERSProtection Grade: IP21SWeight: 14.7 kg TECHNICAL PARAMETERSPower: 5.2 kWIdle Voltage: 56 VCurrent at 60% operation: 180 ASelf-stranded wire diameter: 0.8 - 0.9Steel wire diameter: 0.6 - 0.8Stainless steel wire diameter: 0.6 - 0.8Welding current adjustment range: 30 - 200 APOWER SUPPLY PARAMETERSCurrent drawn from mains: 20 AName supply voltage: 230 V; 50Hz (1ph). Inverter semi-automatic welding machine recommended for sheet metal and workshop applications.Allows MIG-MAG welding with gas-shielded welding wire, FLUX welding wire with self-consuming welding wire and MMAProvides the ability to change the polarity of the handle for welding with self-consuming wire.Single-phase power supply.For welding by MIG-MAG method, it is possible to regulate: welding current, wire feed speed.Wire feeder: 2-roll, with 0.6-0.8 roll for steel wire.Fan-cooled.Overload protection.IGBT - the welder uses modern transistors, a solution to ensure a minimum of electromagnetic interference low power loss in the basic circuits, allowing to increase the efficiency and reliability of the power source.FCAW - the ability to weld core wire without using a gas cylinder. The wire itself (FLUX) is filled with a substance that produces gases during welding.Inductance Adjustment - allowing less heat to be introduced into the welding area. The sheet metal does not deform and the protective zinc layer is not damaged, useful in lute welding.. Price of machine with complete set of MIG/ MMA accessories:Welding clamp 2.2 mGround cable with 200A clampPower cable with 230V plug8 mm hose barb for gas line connectionWelding shield and brush hammerWelding handle consumables