IDEAL TECNO TIG 220 AC/DC PULSE MPX welder

IDEAL TECNO TIG 220 AC/DC PULSE MPX welder The devices in the IDEAL TECNOTIG 220 MPX series are professional inverter welders designed for manual electric TIG welding.The devices can also be used for MMA welding using electrodes. They are designed for all kinds of welding work in locksmith workshops,repair shops, industrial workshops, factories, etc.The devices are equipped with a "soft" clear panel that allows you to set all the necessary welding functions (start/crater fill/weld/base current, current rise and fall times, gas discharge before and after welding, pulse frequency, balance, etc.).The current source is built on IGBT transistors to ensure minimum electromagnetic interference, low power loss in the basic circuits, enabling increased efficiency and reliability of the current source.Very high efficiency, directly translating into lower power consumption, and high switching frequency, ensure instantaneous current adaptation to parameter changes during welding. BENEFITS OF SPAWARTECNO TIG 220 AC/DC PULSE MPX is a portable power source, made with IGBT technology, designed for TIG and TIG PULS welding with alternating current (AC), direct current (DC), and the MMA method with direct current (DC) covered electrode. The small size and weight make the device ideal for both workshop and field work.The device has the following welding modes: TIG DC, TIG DC PULS, TIG AC, TIG AC PULS, TIG MIX, TIG POINT, MMA.The TIG DC and TIG DC PULS function is used for welding stainless steel, carbon and low-alloy steels, copper, and titanium.The TIG AC and TIG AC PULS function: enables welding of aluminum and its alloys and brass.Function TIG MIX: is a special TIG welding method of combining direct and alternating current, enables full fusion and effective cleaning when welding aluminum.Function TIG POINT (TACK): enables thin materials to be tacked. The very short weld time (adjustable from 0.01 seconds) makes it possible to achieve small spot welds without deforming the material.By adjusting the parameters of TIG PULSE pulsed welding, we can influence the shape of the weld and the focus of the arc. Pulsed welding also reduces the amount of heat delivered to the material and is applicable when welding thin materials. Application: TIG manual welding of aluminum and its alloys TIG manual welding of copper and its alloys- TIG manual welding of alloy steels also stainless steel TIG manual welding of ordinary and high strength structural steels TIG manual welding with covered electrodes, structural steels of ordinary and higher strengthfor manual welding with covered electrodes of cast iron for cold and hot-welding with covered electrodes of alloy steels also stainless steelfor semi-professional and professional use. Price for unit with complete set of TIG MMA accessoriesTIG welding handle 26MMA electrode cableMMA electrode cablemass cablespare parts for handle. Digital display makes it easy to adjust welder parameters:initial shielding gas dischargeinitial currentcurrent rise timewelding currentbase currentbase currentcurrent fall timeend currentfinal shielding gas dischargepulse lengthpulse frequencybalance ACfrequency ACThe welder also has features to facilitate the MMA shielded electrode welding process:ARC FORCE: short-circuit current control (manual) - facilitates the transfer of molten electrode droplets to the material being welded, preventing the arc from being extinguished when the electrode droplet comes into contact with the weld poolHOT START: hot start control (manual) - facilitates electrode ignition by delivering more welding current each time the arc is struck.ANTI STICK: anti-short-circuit - automatically shuts off the welding voltage if the electrode sticks to the material to be welded, making it easier to peel the electrode off and preventing accidental welding arcFan-cooled.Anti-overload protection.. PARAMETERSPower supply protection C25APower supply voltage230 V; 50Hz (1ph)Balance AC10 - 50%Current rise time (s)0 - 10Current fall time (s)0 - 10Frequency AC30 - 200 HzPulse frequency Hz0.1 - 800.0Pulse length (%)10 - 90%Gas after (s)0.1 - 30.0Gas before (s)0.3 - 10.0Power7,6 kWIdle voltage70 V / 12V (VRD)Pulse base current10 - 90%Final current5 - 220ACurrent at 100% operation140A (TIG) / 130A (MMA)Current at 60% operation220A(TIG) / 200A(MMA)Starting current5 -. 220AWelding current adjustment range5 - 200A(TIG DC) / 10 - 200A(TIG AC) / 10 - 200A(MMA)Protection rating IP 21Weight of the device / set 20 / 23 kg.