TECNO TIG 220 AC/DC PULSE MPX welder set.

TECNO TIG 220 AC/DC PULSE MPX welder set. IDEAL TECNOTIG 220 MPX series devices are professional inverter welders designed for manual electric TIG welding.The devices can also be used for MMA welding with electrodes. They are designed for all kinds of welding work in locksmith workshops,repair shops, industrial workshops, factories, etc.The devices are equipped with a "soft" clear panel that allows you to set all the necessary welding functions (start/crater/fill/weld/base current, current rise and fall times, gas discharge before and after welding, pulse frequency, balance, etc.).The current source is built on IGBT transistors to ensure minimum electromagnetic interference, low power loss in the basic circuits, enabling increased efficiency and reliability of the current source.Very high efficiency, directly translating into lower power consumption, and high switching frequency, ensure instantaneous current adaptation to parameter changes during welding. BENEFITS OF SPAWARTECNO TIG 220 AC/DC PULSE MPX is a portable power source, made with IGBT technology, designed for TIG and TIG PULS welding with alternating current (AC), direct current (DC), and the MMA method with direct current (DC) covered electrode. The small size and weight make the device ideal for both workshop and field work.The device has the following welding modes: TIG DC, TIG DC PULS, TIG AC, TIG AC PULS, TIG MIX, TIG POINT, MMA.The TIG DC and TIG DC PULS function is used for welding stainless steel, carbon and low-alloy steels, copper, and titanium.The TIG AC and TIG AC PULS function: enables welding of aluminum and its alloys and brass.Function TIG MIX: is a special TIG welding method of combining direct and alternating current, enables full fusion and effective cleaning when welding aluminum.Function TIG POINT (TACK): enables thin materials to be tacked. The very short weld time (adjustable from 0.01 seconds) makes it possible to achieve small spot welds without deforming the material.By adjusting the parameters of TIG PULSE pulsed welding, we can influence the shape of the weld and the focus of the arc. Pulsed welding also reduces the amount of heat delivered to the material and is applicable when welding thin materials. Application:TIG manual welding of aluminum and its alloysTIG manual welding of copper and its alloys-TIG manual welding of alloy steels also stainless steelTIG manual welding of ordinary and high strength structural steelsTIG manual welding with covered electrodes, of structural steels of ordinary and higher strengthfor manual welding with covered electrodes of cold and hot cast irons- manual welding with covered electrodes of alloyed steels also stainless steelfor semi-professional and professional use. Price of the machine with a set of TIG MMA accessoriesTIG welding handle 26MMA electrode wirewire Bulkspare parts for handlespare parts for handleReducer with rotameterWelding angles 12 Kg x2 pcs. Welding gloves Tungsten electrode TIG Gold 1.6/2.0/2.4 mm - 3 pcs.TIG wire TIG welding wire 1.6mm for black steel - 0.5 kgTIG wire TIG welding wire 1.6mm 308LSi for stainless - 0.5 kgTIG wire TIG welding wire 1,6mm ALMG - 0.5 kgPre-mix APS 616 True COLOR New 8l cylinder filled with Argon Cylinders and valves are brand new. Painted according to the Polish Standard. Cylinders filled. Very light and efficient. Cylinders and valves meet EN 1964-1 standard.Legalization up to 10 YEARS. Digital display makes it easy to adjust the welder's parameters:The welder also has features that make the MMA shielded electrode welding process easier:ARC FORCE:Short-circuit current adjustment (manual) - facilitates the transfer of molten electrode droplets to the material being welded, preventing arc extinction when the electrode droplet comes into contact with the weld poolHOT START: hot start adjustment (manual) - facilitates electrode ignition by providing more welding current each time the arc is struck.ANTI STICK: anti-short-circuit - automatically shuts off the welding voltage if the electrode sticks to the material to be welded, making it easier to peel off and preventing accidental welding arc formationFan-cooled.Overload protection.initial shielding gas dischargeinitial currentcurrent rise timewelding currentbase currentcurrent fall time currentend currentfinal shielding gas dischargepulse lengthpulse frequencybalance ACfrequency ACfrequency AC. PARAMETERSPower supply protection C25APower supply voltage230 V; 50Hz (1ph)Balance AC10 - 50%Current rise time (s)0 - 10Current fall time (s)0 - 10Pulse frequency AC30 - 200 HzPulse frequency Hz0.1 - 800.0Pulse length (%)10 - 90%Gas after (s)0.1 - 30.0Gas before (s)0.3 - 10.0Power7,6 kWIdle voltage70 V / 12V (VRD)Pulse base current10 - 90%Final current5 - 220ACurrent at 100% operation140A (TIG) / 130A (MMA)Current at 60% operation220A(TIG) / 200A(MMA)Starting current5 -. 220AWelding current adjustment range5 - 200A(TIG DC) / 10 - 200A(TIG AC) / 10 - 200A(MMA)Protection rating IP 21Weight of the device / set 20 / 23 kg. Technical parametersAutomatic visorAPS-616G BLACK with variable DIN 4/9-13 protection level, variable brightening time and adjustable sensor sensitivity.Designed for protection in MIG/MAG, TIG and TIG PULSE and MMA welding, equipped with grinding function.4 independent sensors guarantee excellent performance in low-current TIG welding.Physical ParametersHigh-quality LCD filters in koptical class 1/1/1/2.4-arm adjustable headgear provides comfort.A EN175B-compliant shell provides greater impact resistance.Response time: <1/30000sNumber of sensors: 4Optical class: 1/1/1/2UV/IR protection: up to 16 DINDarkness adjustment: 4/9-13 DINAdjustable sensitivity: √Adjustable delay: Infinitely 0.1-1.0sStandard: CE, EN175B, EN379, EN166Battery depletion indicator: √Power supply: photovoltaic cell + 1xCR2032 batteryWelding filter type: APS-616GWeight: 495gFilter size: 100x45 mmPlasma cutting: √MIG/MAG ; MMA: √Grinding: √TIG, minimum current: √, >5A.