MAGNUM MIG 280 Dual Puls Aluminum 400V Welding Machine

MAGNUM MIG 280 Dual Puls Aluminum 400V Welding Machine MAGNUM's MIG 280 DUAL PULS Synergy is a high-tech, professional synergy semi-automatic welding machine with "single and double pulse function"The best Mig for welding aluminum.Designed for manual electric welding of low-carbon steel, low-alloy steel, slow and high-alloy metals, aluminum and its alloys, copper and its alloys, soldering, etc.The device is dedicated to professionals, requiring to meet the highest standards, for welding equipment. ADVANTAGES OF THE DEVICE SYNERGIC CONTROLS MIG PULS AND DOUBLE PULS Easy control IGBT technology Mobile device on wheels 400V power supply WELDING CURRENT 30-.280A Prepared for welding steel , Aluminum , stainless steels , brazing Memory 2/4 Takt function Professional 4 Roll feeder . The current source has been built on IGBT transistors to ensure minimum electromagnetic interference, low power loss in the basic circuits, enabling higher efficiency and reliability of the current source. Very high efficiency, which translates directly into lower power consumption, and high switching frequency, ensure instantaneous adjustment of current to changes in parameters during welding.The MIG 280 DUAL PULS Synergy device has a synergic welding function with single and double pulse, making it possible to obtain the highest quality weld when welding any weldable materials, especially those made of stainless steel and aluminum.Additionally, for thin parts made of aluminum alloys, the ATC function, an advanced heat control function, is available.The ATC function stabilizes the electric arc and reduces the peak value of the welding current, reducing the amount of heat transferred to the material. As a result, it makes it much easier to weld thin aluminum parts, and results in less material distortion, less overheating and a narrow heat affected zone.MIG 280 DUAL PULS Synergy is designed for all kinds of welding work in factories, industrial plants, locksmith shops, repair shops, etc.The current source is built on IGBT transistors to ensure a minimum of electromagnetic interference, low power loss in the basic circuits, allowing increased efficiency and reliability of the current source, lower power consumption, and instantaneous adjustment of current to changes in parameters during welding.Because of its non-large weight and size, it is ideally suited for:automotive workshopsfitter's workshopshousehold. ADVANCED MIG/MAG FEATURES:Synergy Programs: Fe (steel), AlSi/AlMg (aluminum alloys), CrNi (stainless steels), Cu (copper, brazing)MIG PulseMIG Dual Pulse: Balance (10-90%), Pulse Frequency (0.1-9.9Hz), Base Current: 10-280A (voltage correction -5 ÷ 5V), A max. 10-280A (voltage correction -5 ÷ 5V).IP - peak current correction, tP - peak current time correction, Ib - base current correction"Ladder" welding waveform - simple parameter adjustmentHot 4T - increased starting currentPoint welding with parameter adjustmentATC - program for welding thin-walled partsReset to factory settings. The kit includes:MIG 280 Dual PulseMIG chuck 3 metersMass holderElectrode holderWeld holder consumables Specifications:Welding current:30 - 280AEfficiency: 60%Power supply: 400VPower protection: 25AApplicable reel weights: 1-15 kgsCabinet protection: IP21Cooling: fanYoutube presentation: (please copy link to browser )https://www.youtube.com/watch?v=Q6oD5UIF-Is&t=62s FUNCTIONS TO EASE WELDING:Inductance - optimizes the arc characteristics depending on the thickness of the material to be welded. This function is useful for MIG/MAG welding of thin parts - it prevents them from burning out (the thinner the part, the inductance should be higher), affects the shape of the weld, its width, the depth of fusion and the amount of spatter, 2t double-act - pressing the button initiates the gas flow and welding current, pressing the button turns off the welding current, Four-bar 4t - pressing and releasing the handle button initiates gas flow and welding current, pressing and releasing the button again turns off the welding current, Hot 4t - a special "four-bar" mode available for welding Puls MIG and MIG 2-PULS, dedicated especially to welding aluminum alloys. Allows you to set the initial current and preheat the material, taking into account the high thermal conductivity. Spot - spot welding, with the possibility of setting the welding time at the point, available with Puls MIG welding. PULSE/DUAL PULSE - synergic welding functions with single or double pulse, so that it is possible to obtain a high quality weld similar to the TIG method (scale effect). When welding any weldable materials, especially those made of stainless steel ( PULS function) and aluminum ( DUAL PULS function), Memory - the device has 10 memory channels on which the user can save and recall any settings. ATC function - for thin parts made of aluminum alloys advanced heat control function. The ATC function stabilizes the electric arc and reduces the peak value of the welding current, reducing the amount of heat transferred to the material. As a result, it makes welding thin aluminum parts much easier, and results in less material distortion, less overheating and a narrow heat affected zone.