WELDER MAGNUM MIG 200KN /2 MIGOMAT 230/400 KIT

WELDER MAGNUM MIG 200KN /2 MIGOMAT 230/400 KIT MIG 200Kn/2 IGBT MMA is a semi-automatic welding machine designed for welding low-carbon steel, low-alloy steel (MAG), alloy steel (MIG), aluminum and its alloys, and has the ability to weld with covered electrodes (rutile, basic, acid - MMA).This device is used in locksmith workshops as well as in repair shops. It allows welding with steel welding wires with a diameter of 0.6-0.8 mm, as well as self-shielded wires (welding "without gas") and electrodes with a diameter of 1.6-3.2 mm. MIG 200K IGBT MMA is a device adapted to be powered from a single-phase 230/400V network. This device is equipped with an overload thermal protection system to prevent excessive overheating.The MIG 200Kn IGBT MMA equipment is based on the latest, most advanced technology, using IGBT transistors.Thanks to their special design, Insulated Gate Bipolar Transistor (IGBT) power transistors are in many ways a more favorable solution and in many applications a better solution than traditional MOSFETs.A source based on IGBT transistors offers a stronger, more concentrated and more stable arc while consuming less power. It provides a minimum of electromagnetic interference, low power loss in the base circuits allowing increased efficiency and reliability of the current source.The features of these transistors are very high efficiency, translating directly into lower power consumption, high switching frequency, providing instantaneous adjustment of current to changes in parameters during welding.. It is designed for all kinds of welding work, in locksmith shops,repair shops, industrial workshops, factories, etc.The current source is built on IGBT transistors to ensure a minimum of electromagnetic interference, low power loss in the basic circuits, allowing increased efficiency and reliability of the current source, lower energy consumption, and instantaneous current adjustment to changes in parameters during welding.Because of its light weight and size, it is ideally suited for:construction companiescar repair shopssmith shopshouseholds. The set includes:MIG 200KN/2 MMA IGBTMIG 3 meter handleMass handleElectrode handleAdapter 400/230VMini CO2/ART pressure regulatorNew 8l cylinder filled with CO2/ARPainted according to Polish Standard.Cylinders filled. Very lightweight and efficient. Cylinders and valves meet the EN 1964-1 standard. Legalization until 2029rWelding visor MAGNUM MEGA 600 T with grinding functionThe visor is made of the highest quality materials, perfectly protects against the harmful consequences of welding. It is available in four colors, so that each customer can match it to his individual needs and preferences. The automatic welding visor is equipped with a welding filter that has the ability to change the degree of darkness. The filter before welding is transparent, so the welder has the opportunity to observe the work area accurately. When an electric arc is established, the filter immediately darkens. When the arc dies out, the filter becomes transparent again. The visor operator has the ability to change the darkness in the range of 5-13 DIN (depending on the model - see the data table). MAGNUM automatic welding visor provides complete protection against UV/IR (ultraviolet/infrared) radiation, even when the filter is brightened. The visor is powered by solar cells and replaceable batteries.The automatic welding visor is equipped with two or four photo-sensors (depending on the model). In addition, the visor is made of thermo-stable, wear-resistant polymer, into which welding spatters do not melt.5 kg of welding wire sg2/ 0.8 Specifications:Welding current: 200AEfficiency: 60%Power supply: 230V/400VPower protection: 20AApplicable spool weights: 1-5kgHousing protection: IP21Cooling: fanGasless welding: Yes Choose ONE of the visors When ordering, please specify visor number or they are shipped randomly. 1. Display of the current value of welding current.2. Indicator light of the protection system tripping.3. Power supply indication.4. Test wire ejection button.5. MIG-MAG / MMA welding method selection switch.6. Output socket with negative polarity.7. Output socket with positive polarity.8. Socket for connecting MIG-MAG holder (euro socket).9. MIG-MAG wire feed speed adjustment knob.10. Welding current adjustment knob for MIG-MAG and MMA.11. Inductance adjustment knob..