WELDER MAGNUM MIG 200/2 IGBT MMA KN DIG 230/400V

WELDER MAGNUM MIG 200/2 IGBT MMA KN DIG 230/400V MIG 200KN/2 IGBT MMA is a semi-automatic welding machine designed for welding low-carbon steel, low-alloy steel (MAG), alloy steel (MIG), aluminum and its alloys, and has the ability to weld with covered electrodes (rutile, basic, acid - MMA).This device is used in locksmith workshops as well as in repair shops. It allows welding with steel welding wires with a diameter of 0.6-0.8 mm, as well as self-shielded wires (welding "without gas") and electrodes with a diameter of 1.6-3.2 mm. MIG 200K IGBT MMA is a device adapted for power supply from a single-phase network 230 V, 50 Hz/ 400V . This device is equipped with an overload thermal protection system to prevent excessive overheating.The MIG 200Kn IGBT MMA equipment is based on the latest, most advanced technology, using IGBT transistors.Thanks to their special design, Insulated Gate Bipolar Transistor (IGBT) power transistors are in many respects a more favorable solution and in many applications a better solution than traditional MOSFETs.A source based on IGBT transistors offers a stronger, more concentrated and more stable arc while consuming less power. It provides a minimum of electromagnetic interference, low power loss in the base circuits allowing increased efficiency and reliability of the current source.The features of these transistors are very high efficiency, translating directly into lower power consumption, high switching frequency, providing instantaneous adjustment of current to changes in parameters during welding.. It is designed for all kinds of welding work, in locksmith shops,repair shops, industrial workshops, factories, etc.The current source is built on IGBT transistors that provide a minimum of electromagnetic interference, low power loss in the basic circuits, allowing increased efficiency and reliability of the current source, lower power consumption, and instant adjustment of current to changes in parameters during welding.Because of its light weight and size, it is ideally suited for:construction companiescar repair shopssmith shopshouseholds. The set includes:MIG 200 MMA IGBT machineMIG handle 3 metersMass holderElectrode holderElectrode holderAdapter 400v/230vchuckle consumables Specifications:Welding Current: 200AEfficiency: 60%Power Supply: 230V/ 400VPower Protection: 20AApplicable spool weights: 1-5kgHousing protection: IP21Cooling: fanGasless welding: Yes 1. Display of the current value of welding current.2. Indicator light of the protection system operation.3. Power supply indication.4. Test wire ejection button.5. MIG-MAG / MMA welding method selection switch.6. Output socket with negative polarity.7. Output socket with positive polarity.8. Socket for connecting MIG-MAG holder (euro socket).9. MIG-MAG wire feed speed adjustment knob.10. Welding current adjustment knob for MIG-MAG and MMA.11. Inductance adjustment knob..