MAGNUM MIG 330W MMA IGBT 400V 4 - Roller Welder

MAGNUM MIG 330W MMA IGBT 400V 4 - Roller Welder MAGNUM MIG 330W IGBTP Designed for manual electric welding of low-carbon steels, low-alloy steels, low- and high-alloy steels, aluminum and its alloys, copper and its alloys, soldering, etc.The device is dedicated to professionals, requiring compliance with the highest standards, for welding equipment.The current source is built on IGBT transistors that ensure a minimum of electromagnetic interference, low power loss in the basic circuits, allowing to increase the efficiency and reliability of the current source. Very high efficiency, which translates directly into lower power consumption, and high switching frequency, provide instant adjustment of current to changes in parameters during welding. MAGNUM MIGW 330 is designed for all kinds of welding work in factories, industrial plants, locksmith shops, repair shops, etc.The current source is built on IGBT transistors that provide a minimum of electromagnetic interference, low power loss in the basic circuits, allowing increased efficiency and reliability of the current source, lower power consumption, and instant adjustment of current to changes in parameters during welding.Because of its non-large weight and size, it is ideally suited for:automotive workshopssmithing workshopshousehold. MIG/MAG WELDING PARAMETERS:- MIG/MAG welding current: 30 - 330[A]- MIG/MAG welding voltage: 16.5 - 29[V]MMA WELDING PARAMETERS:- Maximum MMA welding current: 250 [A]- Idle voltage: 56 [V]The KIT INCLUDES:- MIG 330w MMA machine- MIG/MAG holder,- Electrode holder,- Mass holder,- Operating manual. The MIG 330w MMA IGBT device has adjustable inductance, which optimizes the dynamic characteristics of the arc depending on the thickness of the material to be welded. The value of the inductance affects the shape of the weld, its width, the depth of fusion and the amount of spatter. The semi-automatic machine is dedicated to welding low-carbon steel, low-alloy steel, alloyed steels, as well as aluminum and its alloys.The current source was built on the basis of the latest technology using IGBT transistors, which translates into reduced electromagnetic interference, low power losses, increased efficiency and reliability of the current source, and significantly affected the reduction of energy consumption. The device has a stepless adjustment of welding parameters, is equipped with an overload thermal protection system to prevent excessive overheating. The welder is equipped with a 2T/4T function, a professional 4-roll wire feeder with a "euro connector" socket, which allows you to connect different types of welding guns, and an output for a gas heater.