WELDER MAGNUM MIG 200/2 IGBT MMA KN DIG 230/400V KIT

WELDER MAGNUM MIG 200/2 IGBT MMA KN DIG 230/400V KIT The MAGNUM MIG 200/2 MMA KN brand device is a semi-automatic welding machine made with inverter technology, it can be powered from both 230 V and 400 V mains.The device allows arc welding with MIG/MAG flux-cored wire, FCAW self-consuming wire (you need to change the polarity in the welder: minus (-) on the welding handle, plus (+) on the ground!), and MMA covered electrode. It is designed for all kinds of welding work in locksmith workshops, repair shops.The current source is built on IGBT transistors that provide a minimum of electromagnetic interference, allowing to increase the efficiency and reliability of the current source, less energy consumption and instantaneous adjustment of current to changes in parameters during welding.The device has a smooth adjustment of welding parameters, is equipped with an overload thermal protection system to prevent excessive overheating. The professional wire feeder with a "euro connector" socket used in the device allows you to connect different types of welding grips. The welder has the ability to adjust the inductance (hardness of the arc) - this function optimizes the characteristics of the MIG/MAG arc depending on the thickness of the parts to be welded, useful when welding thin parts (prevents their burning out) and soldering of galvanized parts.MIG/MAG WELDING PARAMETERS:MIG/MAG welding current: 30 - 200 [A]MIG/MAG welding voltage: 16.5 - 23 [V]MMA WELDING PARAMETERS:Max. MMA welding current: 30 - 180 [A]Idle voltage: 57 [V]. It is designed for all kinds of welding work, in locksmith workshops,repair shops, industrial workshops, factories, etc.The current source is built on IGBT transistors to ensure a minimum of electromagnetic interference, low power loss in the basic circuits, allowing increased efficiency and reliability of the current source, lower power consumption, and instant adjustment of current to changes in parameters during welding.Because of its low weight and size, it is ideally suited for:construction companiescar repair shopsfirmsfirmshousehold. The kit includes:MIG 200/2 MMA IGBTMIG handle 3 metersMass holderElectrode holderAdapter 400v/230vMini CO2/AR pressure regulatorNew 8l cylinder filled with CO2/AR Painted according to Polish Standard.Cylinders filled. Very lightweight and efficient. Cylinders and valves meet the EN 1964-1 standard. Legalization until 2029rWelding visor MAGNUM MEGA 600 T with grinding function The visor is made of the highest quality materials, perfectly protects against the harmful consequences of welding. It is available in four colors, so that each customer can match it to his individual needs and preferences. The automatic welding visor is equipped with a welding filter that has the ability to change the degree of darkness. The filter is transparent before welding, so the welder has the opportunity to observe the work area accurately. When an electric arc is established, the filter immediately darkens. When the arc dies out, the filter becomes transparent again. The visor operator has the ability to change the darkness in the range of 5-13 DIN (depending on the model - see the data table). MAGNUM automatic welding visor provides complete protection against UV/IR (ultraviolet/infrared) radiation, even when the filter is brightened. The visor is powered by solar cells and replaceable batteries.The automatic welding visor is equipped with two or four photo-sensors (depending on the model). In addition, the visor is made of thermo-stable, wear-resistant polymer, into which welding spatters do not melt.5 kg of welding wire sg2/ 0.8welding gloves anti-welding caseswelding handle variable parts. Specifications:Welding Current: 200AEfficiency: 60%Power Supply: 230V/ 400VPower Protection: 20AApplicable spool weights: 1-5kgHousing protection: IP21Cooling: fanGasless welding: Yes 1. Display of the current value of welding current.2. Indicator light of the protection system operation.3. Power supply indication.4. Test wire ejection button.5. MIG-MAG / MMA welding method selection switch.6. Output socket with negative polarity.7. Output socket with positive polarity.8. Socket for connecting MIG-MAG holder (euro socket).9. MIG-MAG wire feed speed adjustment knob.10. Welding current adjustment knob for MIG-MAG and MMA.11. Inductance adjustment knob..