TECNO TIG 220 AC/DC PULSE MPX welder set.

TECNO TIG 220 AC/DC PULSE MPX welder set. IDEAL TECNOTIG 220 MPX series devices are professional inverter welders designed for manual electric TIG welding.The devices can also be used for MMA welding with electrodes. They are designed for all kinds of welding work in locksmith workshops,repair shops, industrial workshops, factories, etc.The devices are equipped with a "soft" clear panel that allows you to set all the necessary welding functions (start/crater/fill/weld/base current, current rise and fall times, gas discharge before and after welding, pulse frequency, balance, etc.).The current source is built on IGBT transistors to ensure minimum electromagnetic interference, low power loss in the basic circuits, enabling increased efficiency and reliability of the current source.Very high efficiency, directly translating into lower power consumption, and high switching frequency, ensure instantaneous current adaptation to parameter changes during welding. BENEFITS OF SPAWARTECNO TIG 220 AC/DC PULSE MPX is a portable power source, made with IGBT technology, designed for TIG and TIG PULS welding with alternating current (AC), direct current (DC), and the MMA method with direct current (DC) covered electrode. The small size and weight make the device ideal for both workshop and field work.The device has the following welding modes: TIG DC, TIG DC PULS, TIG AC, TIG AC PULS, TIG MIX, TIG POINT, MMA.The TIG DC and TIG DC PULS function is used for welding stainless steel, carbon and low-alloy steels, copper, and titanium.The TIG AC and TIG AC PULS function: enables welding of aluminum and its alloys and brass.Function TIG MIX: is a special TIG welding method of combining direct and alternating current, enables full fusion and effective cleaning when welding aluminum.Function TIG POINT (TACK): enables thin materials to be tacked. The very short weld time (adjustable from 0.01 seconds) makes it possible to achieve small spot welds without deforming the material.By adjusting the parameters of TIG PULSE pulsed welding, we can influence the shape of the weld and the focus of the arc. Pulsed welding also reduces the amount of heat delivered to the material and is applicable when welding thin materials. Application: of structural steels of ordinary and higher strengthfor manual welding with covered electrodes of cold and hot cast iron- manual welding with covered electrodes of alloy steels also stainless steelfor semi-professional and professional use. Price of the machine with a set of TIG MMA accessoriesTIG welding handle 26MMA electrode wireMass wirespare parts for the handleReducer with rotameterWelding angles 12 Kg x2 pcs. Welding gloves Tungsten electrode TIG Gold 1.6/2.0/2.4 mm - 3 pcs.TIG wire TIG welding wire 1.6mm for black steel - 0.5 kgTIG wire TIG welding wire 1.6mm 308LSi for stainless - 0.5 kgTIG wire TIG welding wire 1.6mm ALMG - 0.5 kg. PARAMETERSPower supply protection C25APower supply voltage230 V; 50Hz (1ph)Balance AC10 - 50%Current rise time (s)0 - 10Current fall time (s)0 - 10Frequency AC30 - 200 HzPulse frequency Hz0.1 - 800.0Pulse length (%)10 - 90%Gas after (s)0.1 - 30.0Gas before (s)0.3 - 10.0Power7,6 kWIdle voltage70 V / 12V (VRD)Pulse base current10 - 90%Final current5 - 220ACurrent at 100% operation140A (TIG) / 130A (MMA)Current at 60% operation220A(TIG) / 200A(MMA)Starting current5 -. 220AWelding current adjustment range5 - 200A(TIG DC) / 10 - 200A(TIG AC) / 10 - 200A(MMA)Protection rating IP 21Weight of the device / set 20 / 23 kg.