TIG 280 DC COMPACT welder

INVERTIG.PRO series: the benchmark for modern TIG welding. Welding quality, lifetime and energy efficiency:. The new INVERTIG.PRO series offers all this and more. Namely, an innovative bi-power inverter with digital process control for better welding properties. And, of course, excellent ease of use. INVERTIG.PRO COMPACT Series: Flexible and with integrated water cooling. The water-cooled INVERTIG.PRO COMPACT units always offer the right solution for different tasks. As combination units from REHM, they also meet the highest requirements for productivity and reproducible quality. Plug & Play with iSYSTEM. Simply plug in and enjoy multiple application options. Thanks to a multi-processor CAN network architecture with intelligent expansion modules. High performance, light weight and superior energy efficiency. The all-new Bi-Power 200 kHz converter provides three advantages simultaneously. Generator compatibility. Greater flexibility for mobile applications such as construction sites. Automatic frequency - more focus, less load. In AC welding, the frequency automatically adjusts to the current. A focused arc at low welding currents provides safer root detection - z. B. in thin sheets in fillet welds. At higher currents, the load on tungsten electrodes is reduced. Easy welding of aluminum. Easy welding of aluminum, z. E.g. on sheet edges, in forced positions or in "thick to thin": The DUAL WAVE welding process reduces the AC component in the arc to a minimum. The reduced heat input makes it easier to control the weld pool. AC-Matic. Automatically correct AC waveform Fewer tarnish, distortion and rework in spot and intermittent welding. Hyperpulses - Faster, narrower, deeper Automatic stitching function. Reduces color tarnish by almost 100% 100% consistent staple quality Saves up to several thousand euros per year . Efficient energy management. Thanks to the Bi-Power inverter, the absorbed power goes directly to the arc. Safe ignition in any situation. When igniting a DC TIG arc with Lift-Arc and igniting stick electrodes, ICS (Ignition Command System) automatically sets the optimal ignition energy. Characteristics:. Imaginably simple and fantastically safe operation. Everything typical of REHM - even with gloves! 100% duty cycle. Highest duty cycle at 240 A, 280 A, 350 A and 450 A welding currents thanks to the completely newly developed Bi-Power Inverter technology. Burns Safely. Innovative ignition management: Where others stop, INVERTIG.PRO continues to ignite perfectly. TIG AC welding with stable arc. The AC arc remains calm even on critical, highly oxidized material surfaces. Easy aluminum welding. Easily weld aluminum, z. For example, on the edges of sheet metal, in forced positions or "thick to thin." The DUAL WAVE welding process reduces the AC component in the arc to a minimum. The reduced heat input makes it easier to control the weld pool. Controlled AC balance for thin sheet and edge welding. AC balance controls the heat in the tungsten electrode. The energy input allows the arc to be focused, for example when welding thin sheet metal or edge welds. Automatic frequency - more focus, less strain. In AC welding, the frequency automatically adjusts to the current. A focused arc at low welding currents provides safer root detection - for example, in thin sheets in fillet welds. At higher currents, the load on the tungsten electrodes is reduced. ElSA.PRO system: highest repeatability and features. Accurate repeatability even with large melts and excellent welding properties - a guarantee of precise digital control of the welding process. Electrode welding included. INVERTIG.PRO is also a complete electrode welding machine. In addition to welding current, Hot-Start and Arc-Force can be freely adjusted. REHM EASY LOCK for easy connection. With REHM EASY LOCK, the device and the carriage can be connected with a few simple steps. Demand-oriented cooling. Water cooling INVERTIG.PRO series: the benchmark for modern TIG welding Welding quality, lifetime and energy efficiency:. The new INVERTIG.PRO series offers all this and more. Namely, an innovative bi-power inverter with digital process control for better welding properties. And, of course, excellent ease of use. INVERTIG.PRO COMPACT Series: Flexible and with integrated water cooling. The water-cooled INVERTIG.PRO COMPACT units always offer the right solution for different tasks. As combination units from REHM, they also meet the highest requirements for productivity and reproducible quality. Plug & Play with iSYSTEM. Simply plug in and enjoy multiple application options. Thanks to a multi-processor CAN network architecture with intelligent expansion modules. High performance, light weight and superior energy efficiency. The all-new Bi-Power 200 kHz converter provides three advantages simultaneously. Generator compatibility. Greater flexibility for mobile applications such as construction sites. Automatic frequency - more focus, less load. In AC welding, the frequency automatically adjusts to the current. A focused arc at low welding currents provides safer root detection - z. B. in thin sheets in fillet welds. At higher currents, the load on tungsten electrodes is reduced. Easy welding of aluminum. Easy welding of aluminum, z. E.g. on sheet edges, in forced positions or in "thick to thin": The DUAL WAVE welding process reduces the AC component in the arc to a minimum. The reduced heat input makes it easier to control the weld pool. AC-Matic. Automatically correct AC waveform Fewer tarnish, distortion and rework in spot and intermittent welding. Hyperpulses - Faster, narrower, deeper Automatic stitching function Reduces color tarnish by almost 100% 100% consistent staple quality Saves up to several thousand euros per year . Efficient energy management. Thanks to the Bi-Power inverter, the absorbed power goes directly to the arc. Safe ignition in any situation. When igniting a DC TIG arc with Lift-Arc and igniting stick electrodes, ICS (Ignition Command System) automatically sets the optimal ignition energy. Characteristics:. Imaginably simple and fantastically safe operation. Everything typical of REHM - even with gloves! 100% duty cycle. Highest duty cycle at 240 A, 280 A, 350 A and 450 A welding currents thanks to the completely newly developed Bi-Power Inverter technology. Burns Safely. Innovative ignition management: Where others stop, INVERTIG.PRO continues to ignite perfectly. TIG AC welding with stable arc. The AC arc remains calm even on critical, highly oxidized material surfaces. Easy aluminum welding. Easily weld aluminum, z. For example, on the edges of sheet metal, in forced positions or "thick to thin." The DUAL WAVE welding process reduces the AC component in the arc to a minimum. The reduced heat input makes it easier to control the weld pool. Controlled AC balance for thin sheet and edge welding. AC balance controls the heat in the tungsten electrode. The energy input allows the arc to be focused, for example when welding thin sheet metal or edge welds. Automatic frequency - more focus, less strain. In AC welding, the frequency automatically adjusts to the current. A focused arc at low welding currents provides safer root detection - for example, in thin sheets in fillet welds. At higher currents, the load on the tungsten electrodes is reduced. ElSA.PRO system: highest repeatability and features. Accurate repeatability even with large melts and excellent welding properties - a guarantee of precise digital control of the welding process. Electrode welding included. INVERTIG.PRO is also a complete electrode welding machine. In addition to welding current, Hot-Start and Arc-Force can be freely adjusted. REHM EASY LOCK for easy connection. With REHM EASY LOCK, the device and the carriage can be connected with a few simple steps. Demand-oriented cooling. INVERTIG.PRO cools only when the water temperature requires it. And it saves you money. ergonomics Best weight ratio, optimized handle design, reduced noise - because it's all about your health. Enclosed cooling system. Separate dirt from electronics and extend the life of your machine. Note: Maintenance of welding power sources must be carried out once a year in accordance with BGV A 3 and VDE 0544-207. Our service department is here to help.Dimensions and weights. Length (product) approx.: 855. Width/depth (product) approx: 600Height (product) approx.: 900. Weight (net) approx: 76Work cycle. Operating cycle at max. current 40°C TIG: 100Operating cycle at max current 40°C Electrode: 60. Current at ED 100% 40°C TIG: 280Current at ED 100% 40°C Electrode: 260. Electrical data. Power supply voltage: 3 x 400Equipment data. Torch cooling: WaterStandards and approvals. EMC class: A. Explanation EMC Class: This Class A welding device is not intended for use in residential areas where power is supplied by a public low-voltage power system.