Portable TIG AC/DC inverter 201 AC/DC P Pulse

Built with modern inverter technologyIdeally suited for assembly work due to protection class IP 21S generally also for outdoor workUniversally applicable for welding of all common electrode typesTIG pulsing enables welding with reduced heat inputHF high frequency ignition ignites during TIG welding without touching the workpieceQuiet running fans dissipate heat well from the equipment for long duty cyclesTime controlled fan with stand-by modeAdjustable balancePrecise setting of welding parameters via digital displayDevice equipped with PFC (power factor correction), enables best use even on cable drumsOptional with water coolingMultivoltage from 110 to 230 volts Nine programs can be storedAC triangle wave welding output: reduced heat input for the same current setting, especially useful for welding thin metalAC Sine Wave Welding Output: Traditional AC TIG welding waveform, quieter, "softer" arc characteristics.AC square wave: focused arc for maximum penetration, fast travel speed with best directional controlMMA mode with hot-start and arc-force control. For workshop and mobile applications Built with modern inverter technologyIdeally suited for assembly work due to protection class IP 21S generally also for outdoor workUniversally applicable for welding of all common electrode typesTIG pulsing enables welding with reduced heat inputHF high frequency ignition ignites during TIG welding without touching the workpieceQuiet running fans dissipate heat well from the equipment for long duty cyclesTime controlled fan with stand-by modeAdjustable balancePrecise setting of welding parameters via digital displayDevice equipped with PFC (power factor correction), enables best use even on cable drumsOptional with water coolingMultivoltage from 110 to 230 volts Nine programs can be storedAC triangle wave welding output: reduced heat input for the same current setting, especially useful for welding thin metalAC Sine Wave Welding Output: Traditional AC TIG welding waveform, quieter, "softer" arc characteristics.AC square wave: focused arc for maximum penetration, fast travel speed with best directional controlMMA mode with hot-start and arc-force control. Dimensions and weights. Length (product) approx: 580Width/depth (product) approx.: 190. Height (product) approx: 350Weight (net) approx.: 14.5. Equipment. Power factor correction: TIG pulsing procedure: Range of adjustment. TIG setting range: 3 - 200Electrode adjustment range: 10 - 200Work cycle. Operating cycle at max current 40°C TIG: 60Operating cycle at max current 40°C Electrode: 35. Current at ED 100% 40°C TIG: 155Current at ED 100% 40°C Electrode: 120. Electrical data. Power supply voltage: 90 - 275Power frequency: 50/60. Power factor: 0.99. TIG AC power consumption: 19.2. DCTIG DC power consumption: 20.5. Electrode AC power consumption: 27.5. DCurrent consumption electrode: 30. Electrode. Weldable electrodes: 1.6 - 4.0Data of device. Pulse indicator: 0.5 - 999. Firing: high frequency. Torch cooling: Gas / waterBasic functions. Plate thickness: 0.5 - 10Standards and approvals. Standard: EN 60974-1:2012, EN 60974-10:2014. EMC class: A. Explanation EMC Class: This Class A welding device is not intended for use in residential areas where power is supplied by the public low-voltage power supply system. The EMC Class: A. Power consumption. TIG energy consumption: 4.7Electrode energy consumption: 6.9. Electrical connection. Required generator power: >6.9. Open circuit voltage: 10.4(MMA), 70 (TIG). Power cord length: 2.2