EG 1 electrode grinding machine

Optimized for use in the workshop and during assemblyCutting electrodes from 1.0 - 4.0 mmMinimal grinding of material on the electrode of only 0.3 mm thanks to the built-in setting gauge, This allows up to 200 grindings instead of only 50 - 100Electrode does not glow during the grinding processSmoothly adjustable grinding angle from 15 to 180°Integrated extraction with P3 dust filter for optimum user protectionPrecise electrode guidance in the clamping chuckFor electrodes up to 22 mm longAlso available for grinding short electrodes (up to 15 mm), e.g., for orbital welding systems. e.g. for orbital welding systems, collets required as accessoriesThree grinding planes of the diamond disc can be used by simple adjustment, increasing the life of the disc threefoldElectrodes with metal drops can also be ground directly, saving time and electrode ablationPowerful 850 W motor Why grind electrodes? In order to avoid ignition and displaced arc problems in DC TIG (direct current) welding, electrodes should be sharply sharpened for current flow! In AC TIG (alternating current) welding, the chamfer must be ground for a narrow arc on the electrode from Ø 1.6 mm in the direction of current flow! Best welding results with optimally grounded electrodes Optimized for use in the workshop and during assemblyFor cutting electrodes from 1.0 - 4.0 mmMinimal grinding of material on the electrode of only 0.3 mm thanks to the built-in setting gauge, This allows up to 200 grindings instead of only 50 - 100Electrode does not glow during the grinding processSmoothly adjustable grinding angle from 15 to 180°Integrated extraction with P3 dust filter for optimum user protectionPrecise electrode guidance in the clamping chuckFor electrodes up to 22 mm longAlso available for grinding short electrodes (up to 15 mm), e.g., for orbital welding systems. e.g. for orbital welding systems, collets required as accessoriesThree grinding planes of the diamond disc can be used by simple adjustment, increasing the life of the disc threefoldElectrodes with metal drops can also be ground directly, saving time and electrode ablationPowerful 850 W motor Why grind electrodes? In order to avoid ignition and displaced arc problems in DC TIG (direct current) welding, electrodes should be sharply sharpened for current flow! In AC TIG (alternating current) welding, the chamfer must be ground for a narrow arc on the electrode from Ø 1.6 mm in the direction of current flow!!Electrode diameter: 1.0 - 4.0Electrode length min: 22Grinding angle: 15 - 180Speed: 8000 - 22000. Diamond disc diameter: 40Dimensions and weights. Weight (net) approx: 3.8Electrical data. Drive motor power: 0.85Power voltage: 230Power frequency: 50 / 60.