WEP 706 soldering station is a 2-in-1 hotair + soldering tip with Twin Turbo system The WEP 706 station is a 2-in-1 hot air soldering station for desoldering and soldering electronic circuits, such as BGA, SMD and etc., and a 60W grotto soldering station. The station has two built-in LED displays indicating the set temperature of the hot air and the soldering tip. The station also has infinitely adjustable Hotair blowing power, and thanks to Twin Turbo technology, we get blowing power up to 168L/min. The WEP 706 station is designed with ESD Safe technology, which protects soldered parts from damage. Both modules of the station, i.e. the soldering iron and Hotair, can work independently of each other. The station is additionally equipped with an automatic cooling system after finishing work. This effectively extends the life of the heating element. Thanks to the high power of 60W and the speed of heating, the grotto station is suitable for lead-free soldering in addition to lead soldering. Hot air operation in automatic/manual mode. By selecting the automatic operation mode, when you put the hot air flask down on the stand, the device will automatically stop heating and cool down to a safe temperature. This will ensure long, trouble-free operation of the heating element, save electricity and ensure the safety of service. Choosing the manual mode, when we often need to solder something, then we save time and increase the efficiency of work. It is recommended before finishing work, to switch to automatic mode. The temperature correction function depends on the working environment, the efficiency of the heating element, the blowing power, the consumption of the mainsheet, all this affects the appropriate temperature correction to obtain the set parameter. Features: - Legible 2 LED displays - indication of actual and set temperature - Airflow generated in technology: Twin Turbo - Air flow power: up to 168L/min - Standard nozzle size 22mm - Soldering irons work independently of each other - Choice of temperature display units (C/F) - Soldering flask stand with put down sensor - Gross weight: 3.36 kg Soldering iron WEP 706: - Power supply: 230 V - ESD SAFE protection - Can be calibrated - Dimensions: 255 x 185 x 135 mm (length x width x height) Hotair soldering iron - LED display of hot air temperature - Infinitely adjustable hot air temperature from 100°C-480°C - Twin Turbo technology blowing: up to 168L/min - Temperature stability: +/-1°C - Flask cable length: about 90 cm Blade soldering iron - LED display of the mainsail temperature - Infinitely adjustable arrowhead flask temperature from 200°C-480°C - ESDSafe system - Peak power 60W - 45W heating element - Flask cable length: approximately 100CM - Reinforced metal heating element - Temperature stability: +/- 2°C - Output voltage: 24 VAC - Ground resistance of the mainsail: - Ground potential of the soldering tip: