Spartus MIG 125 Easy MIG Easymig 125 A Welder

LEFT MIG FOR WELDING WITHOUT GAS SHIELDSPARTUS EasyMIG 125 is a small size welder, designed based on IGBT transistors. It is designed for welding with cored wire (FCAW).Maximum welding current is 100A. The device is powered by a single-phase power supply (230V).The EasyMIG 125 semi-automatic welding machine has overload and overheating protection If any of the problems occur, an alarm light on the front panel will come on and the current will be automatically cut off.The device has a two-roll wire feeder and a 1kg/100mm spool mount. The welding chuck and ground wire are permanently mounted.Thanks to its small size and the ability to weld with self-consuming wire without gas, the device will prove useful for outdoor work and in the field where moving with a heavy gas cylinder is not required.Technical parametersPower supply voltage: ~1× 230V ± 10% 50 / 60 HzMIG welding current: 40 - 100AMIG duty cycle: 30%Work output voltage: 16.6VFeder type: built-in, 2 - rollerWire spool: ≤ 1kg / Ø100mmWire diameter: 0.8mmCurrent consumption: 19.6APower factor (cosφ): 0.58Insulation class: FProtection grade: IP21SWeight: 5.8kgDimensions: 410×150×285mmLightweight MIG TO WELD WITHOUT GAS SHIELDSPARTUS EasyMIG 125 is a small size welder, designed based on IGBT transistors. It is designed for welding with cored wire (FCAW).Maximum welding current is 100A. The device is powered by a single-phase power supply (230V).The EasyMIG 125 semi-automatic welding machine has overload and overheating protection If any of the problems occur, an alarm light on the front panel will come on and the current will be automatically cut off.The device has a two-roll wire feeder and a 1kg/100mm spool mount. The welding chuck and ground wire are permanently mounted.Thanks to its small size and the ability to weld with self-consuming wire without gas, the device will prove useful for outdoor work and in the field where moving with a heavy gas cylinder is not required.Technical parametersPower supply voltage: ~1× 230V ± 10% 50 / 60 HzMIG welding current: 40 - 100AMIG duty cycle: 30%Work output voltage: 16.6VFeder type: built-in, 2 - rollerWire spool: ≤ 1kg / Ø100mmWire diameter: 0.8mmCurrent consumption: 19.6APower factor (cosφ): 0.58Insulation class: FProtection grade: IP21SWeight: 5.8kgDimensions: 410×150×285mm