Thread repair kit M6-M10 V-COIL

V-COIL M6-M10 Thread Repair KitV-COIL M6-M10 Thread Repair KitDrilling: drill the damaged threads with an ordinary twist drill. In the case of spark plug threads, it is not necessary to drill; in this case, a drill and notch tool is used. Note that larger holes are required when bending the threads.Check: check that the tapping tool and threaded pins are compatible in terms of thread and pitch.Thread: using a special V-COIL tapping tool, cut the thread in the drilled hole. It is recommended to use machining oil. .Fastening the thread insert: place the insert on the tool, making sure that the take-up pivots are positioned in the groove holes, and then adjust with the setting ring. Screw the insert in line with the thread coil under light pressure. Do not rotate in the opposite direction to the screwing direction, as the tenon may break.Tenon breakage: after installation, remove the tool and remove the taking up tenon with a tenon breaker. For larger dimensions and with spark plug threads, the tenon is pulled out with pliers with tapered ends. The tight and precise tolerances and molding process after these operations produce a thread that is often better and stronger than the original thread. .Purpose: Strengthening threads from materials with limited shear strength, such as aluminum and magnesium alloys, use in machine manufacturing, automotive, electrical, medical and aerospace industries, repairing damaged or worn threads, reusing a cull product.Components of VC85 set / M 6 - M 10Technical dataSize: M 6 - 10Standard equipmentScroll drill bits 6.3 / 8.3 / 10.4 mm1x HSS-G tapping M 6 x 1.01x HSS-G Threader M 8 x 1.251x HSS-G Threader M 10 x 1.51x Hand assembly tool with retaining ring No. 91x Hand assembly tool with retaining ring No. 111x Hand assembly tool with retaining ring No. 131x Tenon breaker No. 91x Tenon breaker No. 111x Tenon breaker No. 1325x Thread inserts M 6 x 1.0 - 1.5 D25x Thread inserts M 8 x 1.25 - 1.5 D25x Thread inserts M 10 x 1.5 - 1.5 D V-COIL M6-M10 thread repair kitV-COIL M6-M10 thread repair kitDrilling: drill out the damaged threads with an ordinary twist drill. In the case of spark plug threads, it is not necessary to drill; in this case, a drill and notch tool is used. Note that larger holes are required when bending the threads.Check: check that the tapping tool and threaded pins are compatible in terms of thread and pitch.Thread: using a special V-COIL tapping tool, cut the thread in the drilled hole. It is recommended to use machining oil. .Fastening the thread insert: place the insert on the tool, making sure that the take-up pivots are positioned in the groove holes, and then adjust with the setting ring. Screw the insert in line with the thread coil under light pressure. Do not rotate in the opposite direction to the screwing direction, as the tenon may break.Tenon breakage: after installation, remove the tool and remove the taking up tenon with a tenon breaker. For larger dimensions and with spark plug threads, the tenon is pulled out with pliers with tapered ends. The tight and precise tolerances and molding process after these operations produce a thread that is often better and stronger than the original thread. .Purpose: Strengthening threads from materials with limited shear strength, such as aluminum and magnesium alloys, use in machine manufacturing, automotive, electrical, medical and aerospace industries, repairing damaged or worn threads, reusing a cull product.Components of VC85 set / M 6 - M 10Technical dataSize: M 6 - 10Standard equipmentScroll drill bits 6.3 / 8.3 / 10.4 mm1x HSS-G tapping M 6 x 1.01x HSS-G Threader M 8 x 1.251x HSS-G Threader M 10 x 1.51x Hand assembly tool with retaining ring No. 91x Hand assembly tool with retaining ring No. 111x Hand assembly tool with retaining ring No. 131x Tenon breaker No. 91x Tenon breaker No. 111x Tenon breaker No. 1325x Thread inserts M 6 x 1.0 - 1.5 D25x Thread inserts M 8 x 1.25 - 1.5 D25x Thread inserts M 10 x 1.5 - 1.5 D