INVERTER WELDER SEMI-AUTOMATIC MIG MIG 250A

》》》 SEMI-UTOMAT MIG INVERTOR SPAWARKA 4in1 BASS POLAND BP-4866 《《《》》》 SPAWMIX SPRAY ANTI-DRUST CENTER 400ml 《《》. The welder is designed for welding with self-consuming wire without gas (this is the FCAW (FLUX) method). , which combines the advantages of MMA and MIG/MAG weldingThe device also supports TIG welding and allows welding in Ar+Co2 shielding, thanks to which we can achieve much better results. The welder has a knob that provides stepless adjustment of welding current from 20-250A synchronized with wire feed, and a knob with which you set the inductance.Also, the welder is equipped with a switch that allows you to change the welding method from MIG to MMA. MMAThis is a universal method involving welding with a covered electrode.A current of 250A enables effective continuous cycle welding with electrodes of 2.5 mm diameter.FCAW (Flux Cored Arc Welding)This method involves welding with self-covered wire, a powdered electrode, which means no external gas supply is required.Under high temperature, the wire melts and produces a shielding gas that creates protection around the weld pool.Welding produces a slag that protects the welded part, which must be removed at the end of the work.FCAW welding is very similar to the MAG/MIG method in that it can also be done with a gas shielded core electrode.Additionally, the polarity change handle allows us to work without gas. The roller wire feeder works with 0.8 mm and 1.0 mm diameter self-stripping wire to ensure stable filler wire feeding.A maximum 1.0 kg wire spool can be used during welding. Technical data : Single-phase voltage: 230 V / 50 Hz Input capacity: 4.8 kW Current: 45 A Voltage: 68 V Max MAG current: 35 - 250 A Welding wire: 0.8 - 1.0 mm Welding electrodes: 1.6 - 3.2 mm MMA: 20 -250 A Max. wire spool: 1 kg TIG lift: 15 - 135 A Cooling: windmill Duty cycle: 60%. IN THE KIT️ MIG / MAG welding cable️ MMA 250A electrode cable with holder️ Ground wire️ Welding brush️ Welding mask️ Self-shielded wire roll 0.5 kg Spawmix Splinter Preventer 400 ml.Effectively protects torch nozzles, tools and welded surfaces from metal splatter ingress.Does not adversely affect the welding process and does not cause defects in welded joints.