INVERTER WELDER 330A LCD FUNCTION TIG KIT

》》》 INVERTER WELDER MMA 330A BASS POLSKA BP-4864 《《《》. Inverter welding machine with electronic components using IGBT technology, which enables welding work to be performed with the lowest power consumption and maximum efficiency.The welder is compatible with most commercially available 1.6 - 4.0 mm cellulose, rutile and plain electrodes for welding stainless steel, alloyed steel and non-ferrous metals.The welder is equipped with infinitely adjustable welding current, hot start function HOT START, welding arc dynamics adjustment ARC FORCE LCD display and information lights increase operator comfort. IN THE KIT️ Welder️ Grounding cable 1.8m️ Welding cable 3.9m️ Welding magnet️ Welding mask️ Protective gloves️ Brush PECHNICAL DATA: Voltage: 230 V Frequency: 50 Hz Output current range:30 - 330 A Duty cycle: 40% Efficiency: 80% Power factor: 0.73 Insulation Class: F Protection Class:IP21S Weight:5.2 kg Dimensions:360 x 260 x 275 mm. Magnetic angle bracket enables precise and permanent alignment of material at 45, 90 and 135 degreesIt is indispensable for welding, soldering and assemblyThe product is built with very strong magnets additionally shielded by a plastic surround, in a solid steel housing.It is helpful for welding, assembly of metal parts, soldering, scribing and lifting steel parts. MMA welding MMA mode is an electrode welding mode. The display, after setting the appropriate value with the button (+/-), will indicate the current to be welded and, in addition, will automatically show what electrode to choose for the current.VRD functionThe voltage reduction system, which is designed to turn off the power supply within a few milliseconds after the end of welding. This function is also responsible for reducing the voltage on the covered electrode to a safe level.VRD function can be activated only for MMA mode by holding down the SET button for 5 seconds and deactivated in the same way. HOT START function HOT START popularly known as hot start, allows by temporarily increasing the welding current above the value set by the welder. HOT START operates at the moment of arc ignition and is designed to prevent the electrode from sticking to the material. It is a great convenience when igniting the electrode. To go into the adjustment setting, simply press the SET button until the indicator appears on this icon. The adjustment range of this function is from 0 - 60. ARC FORCE function ARC FORCE stabilizes the arc regardless of its length. It regulates the dynamics of the welding arc. Decreasing the values of the function gives a soft arc and a shallower depth of fusion, while increasing the values of the function gives a deeper fusion and the possibility of short arc welding. At the highest value for the ARC FORCE function, it is possible to "push the electrode into the molten metal pool and burn through the material to the core.To go into the adjustment setting, simply press the SET button until the indicator appears on this icon. The adjustment range of this function is from 0 - 60.AdditionallyThe ANTI STICK function cuts off/minimizes the welding voltage and current in the event of a short circuit between the electrode and the material being welded. ANTI STICK allows the welder to more easily detach the electrode. This function works automatically. The welder has the ability to weld using the TIG method after using the appropriate welding fixture. ( HANDLE IS NOT INCLUDED IN THE SET )When it is installed, the welder turns into a TIG welderTo weld using the TIG method, it is necessary to have a suitable welding handle. Such a handle must have a valve built into the handle that allows you to open or close the outflow of protective gas. In addition, attention should be paid to the compatibility of the size of the current plug with the socket of the welding machine.