TM 3110 - metal lathe, with precision spindle and very simple operation. With a pull screw and a pull shaft. Description: - Inductively hardened and precision ground bed guides - Guaranteed spindle tip concentricity better than 0.015 mm - Smooth-running gear with sprocket wheels operating in an oil bath - Clockwise / counterclockwise rotation switched by a lever on the movable machine slide - Emergency stop impact switch - Hardened main spindle in adjustable tapered roller bearings - Knobs at sled with adjustable fine scale of 0.04/0.01 mm - Heavily ribbed gray cast iron bed for machine tool rigidity - Concentricity on lathe chuck better than 0.04 mm - Four-slot rotary toolholder vice - All slides adjustable for play with wedges - Hardened spindle tip - Pull screw for thread turning and drive shaft for automatic longitudinal turning - Taper turning tailstock with ± 5 mm adjustment - Tailstock sleeve and knob with 0.02 mm fine scale adjustment - Quick, easy and tool-free adjustment of the tailstock position with the clamping lever Longitudinal / transverse feeds: - Automatic longitudinal / transverse feeds - The longitudinal and transverse feeds are activated by the control rod. The activation lever activates the feed with the linkage Scope of delivery: - Three-jaw lathe chuck Ø 200 mm, No. 5 - Fixed support, range 7-102 mm - Movable support, range 10-60 mm - Reduction adapter MK3/MK6 - Fixed centering point MK3 - First filling of the machine with high-quality oil - Control tool - Without base (optional at extra cost)