MAKITA HAMMER DRILL M8100 710W

----------------------------------------MAKITA UGLY DRILL M8100 710W----------------------------------------Makita M8100 is a very lightweight and compact drill.With its 710W motor, the unit ranks in the higher end of this type of tool in terms of achievable power.It is optimal for heavier applications, and is ideal for the most difficult tasks, such as drilling with a larger drill bit in metal and stone, in hard concrete, etc. Drilling with a large drill bit in metal or concrete will no longer be a problem.The working parameters of the tool are infinitely adjustable with the spring switch, which allows you to quite easily select the speed and impact frequency to the surface to be worked on. It is worth mentioning at this point that the drive mechanism uses a power limiter, which is actually a clutch that disconnects the drive when the drill jams. The device freely and smoothly drills in two modes of operation with and without impact.Smooth speed control with a range of from 0 to 3200 rpm, will allow smooth drilling in any material, and will allow fully precise finishing of details. An interesting solution is the speed regulator, which has been placed directly in the trigger of the switch. This handy solution strongly improves the convenience of adjustment, and you yourself with the force of pressure decide what speed you drill.The function of drilling with impact translates into maximum efficiency, and full effectiveness in drilling in such hard materials as concrete, reinforced concrete, brick, hollow block, etc.You have at your disposal a competitive range of strokes, in the order of 0-48000/min.Frequently work using a lot of pressure. The Makita M8100 has been designed very ergonomically. The comfortable handle, covered with a pleasant-to-touch layer of rubber, and the handle, which is adjustable in any plane, have been specially designed, for comfortable work and a secure position in the hand.You are tired of weak clamped drill chucks. The Makita M8100 has a classic long-established rack-and-pinion chuck. You are assured of a strong drill mounting and long component life.Compliance with European safety standards is ensured by CE certification.Take advantage of the manufacturer's 3-year extended warranty. All you need to do is register the product on Makita.en FEATURES AND BENEFITSErgonomically designed tool bodyDrill shank with gear rimSpeed control with switch triggerCylindrical motor housing TECHNICAL DATApower: 710 Wpower supply: 230Vrpm.: 0-3200 rpm./minno. of strokes: 0-48000/minmax. drilling in steel: 13 mmmax. drilling in concrete: 16 mmmax. drilling in wood: 30 mmweight: 2.1 kgIn the kit from us you will receive:impact drill M8100carton packagingside handledrill chuck wrench PRODUCT GALLERY: