YATO HOT AIR STATION LED DISPLAY 750W SOLDERING IRON

*********************************************STATION HOT AIR LED DISPLAY 750W soldering iron*********************************************HOT-AIR hot air station YT-82457 with digital LED display, temperature control and features to improve working comfort and make it easier to make proper soldering connections. The station is equipped with a blowing handle driven by a brushless fan.power: 750Wtemperature range: 100 - 500°Ctemperature accuracy: +- 2°Ctemperature stabilizationairflow: max 120 l/mininfinitely adjustable airflowbrushless fan for quiet operationautomatically cools and goes into hibernation when the handle is put down in the handle on the side of the stationthree dedicated buttons for saving temperature settingsthree round nozzles with diameters: 4.4mm, 8mm, 10mmsquare nozzle with side: 12mmon-off button on the frontfuse in the power socketDigital display with blue LED backlight informs about:the set and then real temperature of the hot-air nozzlewhen the station enters sleep modeservice messagesHot-Air handle with a blower driven by a brushless fan:diameter of nozzle holder: 21mmceramic heatercable length: 1mThe YT-82457 Hot-Air Soldering Station is made with ESD-safe technology, which guarantees no build-up of excess electrostatic charge on the housing. This reduces the risk of damage to sensitive SMD circuits, for example. It heats up to an operating temperature of 350°C in about 6 seconds.The Temperature stabilization function allows you to maintain the preset blowing temperature under different heat demand conditions to make a proper solder joint. Thanks to the built-in temperature sensor in the heater, the real temperature of the air blown from the nozzle is read in real time and compared to the set temperature. The station then increases or decreases current draw as needed to maintain the set temperature.The automatic cool down function combined with the hibernate function allows the hot-air module to cool the nozzle to 100°C and then go into sleep mode. The operator should put the handle back into the plastic holder with the built-in sensor after the work is done, then the nozzle is cooled down and automatically hibernates. Picking up the handle from the handle automatically starts the hot-air module to the preset parameters.The settings memory function allows saving favorite temperature settings to three memory channels. Once saved, the operator can quickly switch to the previously saved settings.Technical dataPower [W]: 750Weight [g]: 900Heat-up time [s]: 6 s to 350 °CMax blade temp [°C]: 500.