2-IN-1 HOT AIR 75W SOLDERING STATION YATO YT-82458

*********************************************STATION SELLER 2W1 HOT AIR 75W YT-82458*********************************************Soldering station with hot air 2-in-1 symbol YT-82458 with dual digital LED display, temperature control and numerous features to help you make proper soldering connections.The station supports 908D soldering flask suitable for the very popular 900M series interchangeable soldering tips and HOT-AIR handle with brushless fan-driven blowing.Soldering station:power: 75Wtemperature range:200 - 480°Ctemperature accuracy: +- 1°Cdevice hibernation: 10 min Hot-air station:power: 750Wtemperature range: 100 - 480°Ctemperature accuracy: +- 2°Cairflow: max 120 l/mininfinitely adjustable airflowbrushless fan for quiet operationautomatic cooling and hibernation of the device when the hot-air handle is put down in the handle on the side of the stationthree round hot-air nozzles with diameters: 4.4mm, 8mm, 10mmsquare hot-air nozzle with side: 12mmCommon features:temperature stabilizationsensor failure detectionon-off buttons on frontfuse in power socketDigital dual display with blue LED backlight informs us about:the set and then the actual temperature of the mainsail/hot-air nozzlethe station enters sleep modeservice messagesthe operating mode of the mainsail/hot-air nozzle heatingThe 908D soldering iron put down on a solid metal stand:heater operating voltage: 24Vhead type: 900Mceramic heatercable length: 1mflask weight: approximately 100gHot-Air handle with brushless fan driven blowing:nozzle holder diameter: 21mmceramic heatercable length: 1mhandle weight: about 200gthe 2-in-1 hot air soldering station with the symbol YT-82458 is made with ESD-safe technology, which guarantees no accumulation of excess electrostatic charge on the housing. This reduces the risk of damage to sensitive SMD circuits, for example. Up to an operating temperature of 350°C, the soldering station heats up in about 15 seconds, hot blowing in about 10 seconds.The temperature stabilization function allows the soldering iron to maintain the set temperature of the soldering tip under different conditions of heat demand to make a proper soldering joint. The soldering tip, depending on the size of the soldered component and the soldering field, gives off more or less heat, and the device, with the help of a built-in tip temperature sensor, continuously reads its real value and compares it to the set temperature, then, depending on the needs, increases or decreases the power consumption to maintain the set temperature.The hibernation function of the device allows the soldering station to go into standby mode, which automatically reduces the operating temperature to 200°C. This avoids unnecessary heating of the soldering iron, which significantly extends its service life. The YT-82458, or more precisely the soldering station module, will enter sleep mode after 10 minutes of operator inactivity.The automatic cool down function combined with the hibernate function allows the hot-air module to cool the nozzle to 100°C and then enter sleep mode. The operator should put the handle back into the plastic holder with the built-in sensor after the work is done, then the nozzle is cooled down and automatically hibernates. Picking up the handle from the holder automatically starts the hot-air module to the pre-set parametersThe sensor failure detection function allows auto-diagnosis of the electronic systems necessary for proper operation of the device. The station, when the power button is turned on, undergoes self-diagnosis and displays an error message in case of problems.