*********************************************HEGAWELD/PLASMATEC MIGOMAT welding wire 0.8 5KG| TYPE: SG2 || Wire Diameter: 0.8MM || WeIGHT: 5KG ||*********************************************High-quality copper-plated welding wire with manganese and silicon by HEGAWELD with thickness 0.8mm. It is designed for welding with the MIG/MAG method.Allows the use of both high amperage for spray arc and low amperage for short-circuit metal transfer.The welding wire comes only in precision reel. On each spool there is a marking containing the diameter of the wire.With this wire we can weld unalloyed steels such as: steels for boilers, structural steels, sheet metal and shipbuilding steels, and carbon-manganese steels in gas shieldingWe also use it in body shops when welding mufflers or body sheets.It can also be used for welding thin sheets with a minimum yield strength of less than 420 MPa.ApplicationWith this wire we can weld unalloyed steels such as steels for boilers, structural steels, sheet metal and shipbuilding steels and carbon-manganese steels in gas shielding. It is also used in body shops for welding mufflers or body sheets.It can also be used for welding thin sheets with a minimum yield strength of less than 420 MPa.Approvals:TUV 12718.00DB: 42.232.01Meets standards:EN ISO 14341 --G: 42 2 M21 3Si1AWS A5.18: ER70S-6Technical data:Weight: 5kgWire diameter: 1.0mmWelding method MIG/MAGDesignation: SG2 (G3Si1)We will ship depending on manufacturer's availability.