PROFESSIONAL OREGON 15" 325" 1.3MM 150MLBK095 GUIDE FOR HUSQVARNA MAKITA OLEO-MAC SOLOThe MICRO-LITETM laminated guide meets the current demand for lightweight, professional chainsaws.The MICRO-LITETM guide should be used in combination with the MICRO-LITETM 0.325" - 95VPX chain. This combination requires less power compared to a standard cutting system.Product Benefits:- The slim shape and light weight of the guide provide excellent maneuverability.- The width of the guide groove has been reduced for compatibility with MICRO-LITETM 0.325" - 95VPX thin-cut chain- The Lubri-Dam solution used prevents oil leakage at the end of the guide bar, which means more oil on the guide bar and chain for better lubrication.- Use on 35 to 45cc petrol chainsawsTechnical parametersBar length: 15" - 38cmGroove width: 1.3mmPitch: .325"Application: Semi-professionalLubri-Dam Technology: Ensure longer guide life with Lubri-DamMicro-Lite Technology: Increase cutting speed by up to 35% with Micro-LiteMounting tip: K095This product is compatible with:Husqvarna: 36, 40, 42, 45, 51, 136, 154, 240, 242, 254, 257, 262, 339XP, 340, 345, 346, 346XP, 350, 353, 357, 357XP, 359, 435, 435E, 440E, 445, 445E, 450E, 455 RANCHER, 460 RANCHER, 460, 455E RANCHER, 41, 44, 50, 133, 137, 141, 142, 234, 238, 242XP, 246, 261, 351, T435, 444, 560XP, 550,Oleo-Mac938, 940, 941, 942, 942C, 945, 946, 947, 950 Super, 950A, 950, 951, 952, 956, 962, E300F, 850, GS410CX, GS44,Solo 639, 641, 644, 645, 647, 650, 651, 652, 656, 665,MakitaDCS430, DCS460, DCS500, DCS5030, DCS520, DCS4300I, DCS5200I, DCS431, 45, DCS4600S, DCS5000, DCS43001,Jonsered370, 380, 410, 420, 425, 435, 45, 450, 451, 451EVS, 452, 455, 490, 49SP, 50, 51, 52, 510, 520, 521, 525, 535, 590, 2012, 2014, 2015, 2016, 2036, 2040, 2041, 2045, 2050, 2051, 2054, 2055, 2145, 2147, 2149, 2152, 2150, 2153, 2155, 2156, 2159, 2163, CS2149W, CS2152W, 2063, 2141,Dolmar109, 110, 111, 112, 113, 114, 115i, 116, PS460, PS4600, PS4605, PS500, PS5000, PS510, PS5100S, PS540,Partner365, 400, 405, 410, 450, 460, 465, 495, 500, 510, 540, 545, P500, P5000, P5500, 470, 1200EL, 1400EL, 1450EL, 1500EL, 1650EL,This product is compatible with pitch .325"What is the pitch of a cutting system?Chain pitch is the distance between the axes of the first and third rivet (anywhere in the chain) divided by two. The pitch throughout the entire cutting system (chain, bar, clutch drum) must be the same. For this product - the pitch is 0.325 inches (Distance between three rivets is about 16.5 mm).Important! For used cutting chains, this distance may increase due to wear of the chain and its tensile properties.Care for longer bar life with Lubri-DamUse every drop of oilLUBRI-DAM is a so-called dam that allows lubricant to stay where it is needed.The LUBRI-DAM dam is formed by a small threshold located at the bottom of the bar groove, just behind the lubrication hole.Through this solution, the oil is retained and more efficiently distributed along the entire length of the bar and chain. Each subsequent guide link of the cutting chain picks up oil and distributes it around the bar.An additional advantage of this solution is that it maintains a greater oil thickness (up to 135%)than the oil film found on bars where LUBRI-DAM is not used. This results in less chance of clogging lubrication holes.LUBRI-DAM significantly increases the life of the guide bar.Increase cutting speed by up to 35% with Micro-LiteMicro-Lite narrow-kerf cutting systems result in increased cutting efficiency and require less saw power compared to standard cutting systems.The Micro-Lite (narrow-cut) chain along with the Micro-Lite guide bar meet the current demand for lightweight chainsaws.The entire system requires less power compared to standard cutting systems. The Micro-Lite family of cutting chains incorporates the most efficient cutting blade design, which uses less saw power ultimately resulting in increased cutting speed and productivity.Cutting is faster with less load on the saw engine.Increases the performance of any sawMost efficient cutting blade designMounting tip: K095The K095 mounting tip is a mounting shape primarily used on Husqvarna saws featuring lower horsepower.Seen on saws of the following brands:Alko, Alpina, Castor, Dolmar, Homelite, Husqvarna, Jonsered, Makita, McCulloch, Oleo-Mac, Partner, Shindaiwa, Solo, Zenoah and othersOREGONis a world leader in the manufacture of cutting systems and accessories for forest and garden equipment.Since the creation of the first chain in 1947, OREGON has continually introduced new innovative products and technologies based on the latest technological advances, such as:- Blue X-Series chains - enabling 16% faster cutting- PowerSharp - a revolutionary system for sharpening the chain on the saw, while operating in seconds.The company is fully committed to quality.The product development strategy and development process goes hand in hand with two important factors in the company: advanced production and management. We have full confidence in our products. We know that their quality and reliability will meet expectations. In addition, we are proud of the distribution system we have established since the 1940s.