----------------------------------------------------------------OREGON PROWADNICA 140SDEA074+ 2x ŁAŃCUCH------------------------------------------------------------------------------------------------Lekka prowadnica odwracalna o zmniejszonym odbiciu. The Double Guard guide bar is designed for mass users of chainsaws.Product benefits:- The tip with reduced radius of rounding helps reduce kickback.- The slim symmetrical shape and light weight of the bar translate into easy maneuverability and the ability to turn the bar over for extended use.- The Lubri-Dam application prevents oil leakage at the end of the bar, which means more oil on the bar and chain for better lubrication.- Use on amateur electric saws and lightweight petrol saws up to 35ccA chain with reduced kickback and low vibration, ideal for homeowners and occasional chainsaw users.Product Benefits:Smoothly sloped stops, recessed cutter links and elevated connecting links between them provide excellent anti-kickback protection.Chisel-shaped cutting links with a sharp profile with two cutting corners feature low vibration and reduced kickback, and provide excellent performance and durability, requiring less maintenance than chains with rounded-profile cutting links.Recommended for amateur electric chainsaws and lightweight petrol chainsaws up to 35cm3 and for bars up to 12" to 16" (30 to 40cm).Number of links: 50pcs.The guide link of the cutting chain is the link that enters and moves in the groove of the guide bar.Although the cutting chain may correspond to the model of your saw, its length depends on the length of the guide bar installed.To select the correct length of chain:CONSISTENTLY count the number of guide linksor look for special markings on the bar - the number of links is usually indicated by a number next to the letters "DL" (from Drive Links)Pitch: 3/8" (low profile)This product conforms to 3/8" (low profile)What is the pitch of the cutting system?Chain pitch is the distance between the axes of the first and third rivet (anywhere on the chain) divided by two. Pitch in the entire cutting system (chain, bar, clutch drum) must be the same.For this product - the pitch is 3/8 inch (Distance between three rivets is about 19 mm).Important! For used cutting chains, this distance may increase due to chain wear and tensile properties.3/8 inch (low profile) is a common pitch used on small, lightweight chainsaws, either petrol or electric.Mounting end: A074Mounting end: A074The A074 mounting end is a mounting shape, mainly used on Stihl brand saws characterized by lower power. The version with a chain tension adjustment system has the designation T074Seen on saws of the following brands:Alpina, Castor, Metabo, Stihl, Oleo-MacTechnical parametersBar length: 14" - 35cmNumber of links: 50 pcs.Groove width: 1.3mmPitch: 3/8" (low profile)Application: HobbyMounting end: A074This product is compatible with:Stihl: MSE140, MS160, MS170, MS180, MS191, MS192, MS200, MS200T, MSE200, MS210, MS211, MS230, MS231, MS241, MS250, MS251, 009, 010, 011, 012, 017, 018, 019, 019T, 020, 020T, 021, 021C, 023, 025, 25,Oleo-Mac: OEM200, 240,Alpina: P360, P370, P390, Elletra 160, Elletra 170, Energy 1.6, Energy 1.8, Sinergy 35, Sinergy 40,.