TECHREBAL 8586 2-in-1 Soldering Station

Techrebal 2-in-1 HotAir + Cob Soldering Station 8586 760W Brand Techrebal 2-in-1 - Hot-Air and Cob Modern electronics inside New Hot-air supply system.Air Fast calibration Power of 760W Fast heating Hot-Air temperature control: 100 - 500 °C Grotto Temperature Adjustment: 200 - 480 °C Blowing power adjustment You can use hot air and flask soldering iron at the same time. Just switch with the SET button to see whether to set the temperature. The LED on the station symbolizes which temperature is currently being shown. Hot Air flask equipped with special silicone hoses that can withstand high temperatures (up to 300°C). As the only station of its kind available on the market, it has quick calibration capability! (Instructions under the description) The station has temperature stabilization, i.e. maintaining the set temperature during soldering. Designed for soldering work with components such as SOIC, QFP, PLCC, BGA, SMD chips, etc. As well as heating, annealing heat shrink sleeves, thawing, dissolving adhesives, tanning paint, heating, etc. Thanks to its compact metal housing, the station takes up very little space. Built-in fan ensures very low noise and long-lasting, trouble-free operation with stable blowing power It is additionally equipped with automatic cooling system after operation. which ensures longer life of components. Hot Air :️ Power: 700w️ Temp Stability: ± 1'C️ Brushless fan️ Airflow: 120 l/min(max)️ Noise level: <45dB️ Temp control: 100 ~ 500'C Ground soldering:️ Power: 60 W️ Temp stability: ± 1'C️ Soldering iron: ESD design️ Heater material: nichrome️ Temp control: 200 ~ 480'C Station dimensions: 10x13.2x15cm Features : 2-in-1 station soldering grotto and Hot-Air Hot-Air flask when the station is turned off, or put down on the handle automatically cools down the heating element to 70°C Possibility to work simultaneously with soldering iron and hot air Entirely controlled by PID controller LED display with actual temperature Flask made with ESD Safe technology Station allows quick heating to the set temperature More than 80 types of tips available for the station -. 900M arrowheads Ceramic heater High quality resistance for durable use 2 buttons for temperature setting, 1 to switch between soldering iron and hot-air temperature and 1 to set air flow Included :1️⃣ Soldering station 85862️⃣ Grotto flask3️⃣ Hot-air flask4️⃣ Grotto soldering iron stand including sponge for cleaning the soldering iron ( sponge should be moistened before working)3 interchangeable nozzles:5️⃣ round 5mm6️⃣ round 8mm7️⃣ round 10mm8️⃣ Power cord As the only soldering station model available on the market that allows you to replace the heater without unnecessary soldering wires, heater terminated with 4 pins, which allows for quick replacement, especially if you do not have a second device to solder it - a perfect solution was used here. ️ The device has the ability to quickly calibrate the temperature:1️⃣ Turn on the device and select the module you want to calibrate (soldering iron, or hot-air)2️⃣ Press the UP and DOWN buttons simultaneously (decreasing and increasing the temperature), the display will show dots next to each number.3️⃣ To confirm the change and complete the calibration, set the temperature shown by the meter, then press the SET button, the LED will jump momentarily to the 2nd module, then return to the calibrated module - the calibration is complete :)️ The station indications after calibration are practically perfect, the values will vary slightly when using arrowheads of different diameters or lengths. To calibrate the station you need a temperature gauge available in our offer :).