. . Black-37422 250A Semi-Automatic Welding MachineMass cableMIG handleHand maskEuro cableBrush with hammer2x Wire 0,8mm (0.25kg)Kraft&Dele self-shifting maskMagnetic angle 3"10x welding electrode. SPECIFICATION:Power supply voltage: 230VFrequency:50HzName input capacity:2.6KVAWelding methods: FLUX - semi-automatic welding with self-stripping wire "without gas"Grid protection:min 16APanel with LED backlightElectrode range: 1.6-4 mmWelding cycle: 60%Protection rating: IP21Welding current:40-250AWire speed: 3-15m/minDimension: 310*155*220mm Weight: 6.5kgHOT STARTcommonly called hot start, it enables by temporarily increasing the welding current above the value set by the welder. HOT START operates at the moment of arc ignition and is designed to prevent the electrode from sticking to the material. It is a great convenience when igniting the electrode.ANTI STICKcuts/minimizes welding voltage and current in the event of a short circuit between the electrode and the material being welded. ANTI STICK allows the welder to more easily detach the electrode.ARC FORCEstabilizes the arc regardless of its length. It regulates the dynamics of the welding arc. Decreasing the values of the function gives a soft arc and a shallower depth of fusion, while increasing the values of the function gives a deeper fusion and the possibility of short arc welding. At the highest value for the ARC FORCE function, it is possible to "push the electrode into the molten metal pool and burn through the material to the surface.. The BLACK series device is a semi-automatic welding machine designed for manual, electric welding of steel with self-cored wire (FCAW Flux-Cored Arc Welding method).TheFCAW method is arc welding with flux-cored (powder) wire.It is a welding method similar to the MIG/MAG method, except that the wire is internally filled with flux or a chemical that produces protective gases during welding.FCAW welding combines the advantages of both covered electrode and MAG welding: very high productivity (no need for frequent electrode changes) can also be welded outdoors (flux also protects against oxidation of the weld) the welder does not need to have very high qualifications.It is designed for all kinds of welding work, in locksmith shops, repair shops, body shops, farmhouses, etc.The current source is built onIGBT transistors ensuring minimum electromagnetic interference, low power loss in the basic circuits, enabling increased performance and reliability of the current source.The single-roll feeder works with 0.8 / 0.9mm diameter wire.. SMOKING WELDING MASK/WELDING GLASS Kraft&Dele KD849Designed for welding with all electric arc methods - MMA coated electrode and gas shielded semi-automatic MIG MAG and TIG.It is also possible to weld using the TIG (-) method - small current (20A).A special sensor located in the filter cartridge automatically identifies the start of the welding process, activating the self-darkening function.After completion of work, the filter automatically returns to the brightened state.The filter is powered by internal batteries that self-charge via solar cells and do not require replacement.Compact and aesthetically pleasing design, high precision manufacturing.Very durable.Easy to use.Provides a wide field of view and maximum safety.Automatic on and off.Protects against UV and IR radiation.Provides multi-stage adjustment to fit the size of the user's head.Has adjustable shading, photo-sensor sensitivity adjustment and a switch to select the welding mode.The visor is made of highly resistant polymer material. MATERIAL DATA Brightness state: 4 DINBrightness level in darkened state: 9-13 DINEye protection according to standard: EN379 1/2/1Face protection according to standard: EN175Field of vision: 92.5mm x 42.5mmResponse time: no more than 0.0001 seconds Weight: 490 gSafety mark CE. CLASSIFICATION: AWS A5.20 E71T-GS Diameter: 0.8 MM | WEIGHT: 1.0 KG | METHOD: MIG (FLUX / FCAW) | HEAD DIAM: 100 MM | INTERNAL DIAMOND: 17 MM Black's E71T-GS fi 0.8 mm / 1 kg self-stripping powder wire is designed for welding ordinary and higher strength carbon steels not exceeding 510 MPa. It is used in prefabrication, construction, tank manufacturing, agricultural equipment, etc. Used in both manufacturing and repairing equipment. Application: Designed for all welding positions, single-layer fillet and butt welds, during automatic and semi-automatic welding.Can be used for aluminized and galvanized steels with a thickness of 1.2 - 5.0 mm.Designed for general use when there are no impact resistance requirements. Approvals: SpecialProtective gas (EN ISO 14175):Self-inserting wire SHIELDING: 75 - 85% WELDING CURRENCY: =(-) KIT CONTENT: Welder BLACK-.37422 Hand maskBrush with hammerMass cableMIG handleEuro cable2x Wire 0,8mm (0.25kg)Kraft&Dele self-shifting maskMagnetic angle 3"10x welding electrodeInstruction manualOriginal packaging.