MIGOMAT MIG MAG TIG MMA FLUX 400A 4-in-1 SPAWARKA

. . 100% INVERTER MIG MAG and MMA and TIG and FLUX electrode welder. 4-in-1 welderMMA MIG/MAG TIG LIFT FLUX gasless welding ►Each even the simplest INVERTER is incomparably BETTER than even the most expensive already obsolete transformerHere we are dealing with a proven device, improved for years, We invite you to read customer reviews of the product►Times it is really worthwhile to add a few zlotys and weld the structure safely with an appropriate fusion in its full cross section, not just superficially glued, not to mention the appearance and strength of the weld itself.Inverter does not splash, does not leave "balls". , melts the material well, creates a nice weld without much experience of the welder after proper amperage setting Main advantages of INVERTERS:- High EFFICIENCY- low power consumption- ability to work on 16A 20A extension cords and fuses- low weight- high quality weld- ability to work with generators- automatic settings and functions for improved working comfort- ability to weld MIG MAG MMA FCAW FLUX TIG after using accessoriesSet includesmass handle (-): - 2mMMA electrode holder (+): - 2.1mEuro MIG / MAG handle: 3.2mWelder KD811. One of the best mig machines on the market! The best price-quality ratio! The product of a proven brand KRAFT, which has specialized in welding for years. Equipment of this company is a guarantee of quality and reliability. If you need a reliable device, this is the perfect choice for you. The device complete, ready to work after receiving the shipment. ground holder (-): - 2m MMA electrode holder (+): - 2,1m EURO MIG / MAG holder: 4.2m Self-shielding welding wire for welding steel parts without shielding gas. The use of the wire allows welding without the need for additional shielding gas. EURO SOCKET AND HOLDER The presented model of the welder has a standardized EURO socket, so we can attach to the device any MIG/MAG welding chuck that has this plug. CHANGE OF WELDING POLARITY The Migomat allows welding with self-shielding wire without the need for shielding gas. FLUX welding, combines the advantages of MIG/MAG welding (wire wound on a spool, is fed via a feeder into the holder) and MMA (no shielding gas required). Thanks to its design, the KD811 mig welder will find use in both home workshops and households, as well as in more professional applications, such as performing field work and all kinds of repair work inside buildings. KRAFT&DELE's migomat is a device with a wide range of applications, designed as an inverter power source that allows MIG/MAG or FCAW gas shielded flux-cored wire welding (after the change of polarity), MMA welding with covered electrode, as well as TIG Lift method (this requires the purchase of an additional holder for TIG Lift welding) The electronics of the device are based on IGBT transistors combining the advantages of two types of transistors the ease of control of field-effect transistors and the high breakdown voltage and switching speed of bipolar transistors. The welding current is very stable, which guarantees a perfect weld. Thanks to IGBT technology, the device is lightweight and compact. WELDING: The welding parameters are infinitely adjustable (stepless), the maximum welding current depends on the thickness of the wire / electrode used, the welding voltage, as well as the wire feed speed for the MIG / MAG / FCAW method. The two-roller feeder works with wire of 0.6 / 0.8 / 1.0mm diameter. The high efficiency of the welder allows to weld 400A in 60% duty cycle. The thermal circuit breaker will turn off the device in case of exceeding the permissible duty cycle for a given welding current, thus preventing the welder from overheating. The current parameters of the device during welding are displayed on two very clear displays that facilitate the selection of optimal working parameters. Convenient and very clear manipulators allow you to change welding parameters even with gloves on. TECHNICAL DATA: model: KD811 power supply: 230V / 50Hz power consumption MIG / MAG: 6,1kVA TIG / MMA power consumption: 5,8kVA welding methods: MIG / MAG / FCAW / MMA (electrode) / TIG FLUX supported wire diameter: 0.6 / 0.8 / 1.0mm supported electrode diameters: 2.5mm - 4mm supported wire spools: up to 5kg max. wire feeder: 2 - roller (internal) insulation class: F degree of protection: IP21S dimensions: 45 x 20 x 33 cm [length / width / height]. net weight: 12kg