STILER BX 62 disc chipper

Introducing the STILER BX 62 Disc Chipper A phenomenal and reliable chipper for special tasks. The described disc chipper is used for shredding branches and tree trunks with a diameter of up to 15cm. The chipper with a three-point suspension system is designed to work with an agricultural tractor with a minimum power of 30 km. Disc chippers, unlike drum chippers, do not load and damage the engine in the tractor and do not cause faster wear of the clutch. The cutting disc overcomes the resistance of cutting by inertia - the weight of the cutting disc alone is 79 kg. The drive is transmitted from the tractor through the PTO shaft, which is equipped with a safety pin, which is cut in case of too much load on the machine and disconnects our direct drive. The produced woodchip is ejected through a pipe rotated by 360° in relation to the base of the chipper. Massive disc equipped with 4 knives sharpened on both sides + one counter-knife. Additionally, our disc is equipped with shredders (shovels) shredding the additionally obtained chipping to the value of 20-50 mm. The chipper is additionally equipped with ventilation of the disc. All bearings protected against the entry of dust, chipping, etc. are lubricated through easily accessible calamites. All hitches, pins, etc. are included - you are buying a machine prepared to work with a Polish clear instruction manual and ce certificate! In an additional option - a wom shaft with overload protection The chipper is equipped with a safety flap blocking the retraction of the tree. Technical data Model: BX62 Size of shredded material: 15cm diameter (maximum 25cm with offshoots) Drive system: Drive from the tractor engine transmitted through the PTO Minimum tractor power: 30 hp Turner size: 76 cm Number of cutting knives: 4 + 1 Counter blade Knife type: Hardened CR12 tool steel Turner weight: 79 kg Material feeding mechanism: Manual operation Fixing system: Three-point linkage (three-point linkage) Dimensions (with feed hopper folded): 127 cm D x 132 cm S x 188 cm W Feed hopper: 50 x 50cm Ejection tube rotation range: 360° Ejector tube height: Rating revolutions per minute/ Rated RPM: 540-1000 Chipper weight: 390 kg Review videos.