STILER MJ12 1600 mm table saw with undercutter

The STILER MJ 12-1600 format circular saw. The circular saw, thanks to its specifications, is suitable for cutting both narrow and thin boards and thick up to 100 mm thick wood tops. The machine is equipped with a number of useful functions, with which they allow you to achieve the desired effect in woodworking. Among them are: Cutting sub-cutter for MDF Infinitely adjustable height of the cutting disc Cutting disc inclination in the range of 90°-45° Massive guides with scales, longitudinal (steel) and angular as well as table extension as standard. Additional format table for large-format panel cuts Sawdust discharge pipe system Easy and fast replacement of cutting discs Technical data: Power of continuous operation motor S1: 3.0 kW Power supply: 400V Dimensions of main cutting disc (diameter / bore): 315 / 30 mm Dimensions of undercutting disc (diameter / bore): 90 / 20 mm Cutting length: 1600 mm Format cutting length with undercutter: 1600 mm Maximum depth of cut at 90°: 100 mm Maximum depth of cut at 45°: 80 mm Main disc speed: 4000 rpm Rotation of undercutting disc: 5800 rpm Right-hand cutting width: 1260 mm Disc tilt range: 90° - 45° Moving table dimensions: 1600x270 mm Table dimensions: 800x380 mm (extension table 800x1260 mm) Weight: 250 kg Included: Machine Set of tables Cutting disc Set of wrenches to assemble the machine Instruction manual Certificate CE Specifications: The circular saw is equipped with two cutting discs, the main one and the undercutting one. On the front of the machine you will find, a safety switch, a knob for adjusting the height of the disc to 100 mm, a lock for tilting the disc. On the side of the machine you will find a knob for tilting the cutting disc to 45°. A hole for connecting the extraction. The main advantage of the MJ 12 model is a large bearing-supported format table. For large-format cutting of particleboard, etc. Thanks to an additional undercutting disc, it is ideal for cutting furniture board, particleboard. A guide with an angle scale allows you to set any cutting angle. For serial cuts of the same length, the machine is equipped with a side guide with an accurate scale. The saw has a saw blade guard, which can additionally be connected to the extraction. The replacement of the cutting blade is carried out quickly and efficiently after the removal of the metal top and unscrewing the blade. The saw has the ability to cut at an angle of up to 45°. REMOVERS FOR THESE MACHINES YOU CAN FIND IN OUR OTHER AUCTIONS. The saw is equipped with a gauge with an additional measure for measuring and cutting materials with a large surface area. The maximum length of the guide bar 1600 mm. A great advantage is the angle cuts of plates. Thanks to the scale, we will quickly and accurately set the required cutting angle. The saw has two blades, one main blade of 315 mm with a 30 mm hole. And a second undercutting one of 90 mm with a 20 mm hole. This is ideal for accurate cutting of furniture boards. The board is cut evenly and without chipping. The discs are driven by a powerful 3.0 kw 400V motor The machine's control panel is located at the bottom of the saw. There you will find an emergency switch, a knob for angled cuts (45°) and a knob for adjusting the height of the disc with a lock. The upper top is located at a height of 86 cm. Two ground cast iron tops and two extension tops make cutting long parts really fast and convenient. In addition, the upper top is equipped with a culagę with a scale for the length of the material being cut. The long guide table allows us to cut boards and format boards up to a length of 1600 mm. All guides have length scales and cutting angles. Thanks to these additional devices, we can quickly set the required angle and length of cut without taking additional measurements. We can attach sawdust and chip extraction to the table saw (also available in our store). The diameter of the suction nozzle is 100 mm.