STILER G5025 band saw machine

Original belt cutter STILER G 5025 NEW POWERFUL MODEL. PROFESSIONAL, VERY POWERFUL AND EFFICIENT Widely used in locksmith, manufacturing, craftsmen's workshops. The new model uses a more powerful three-phase motor equipped with additional protection, a new generation maintenance-free hydraulic cylinder, liquid cooling in a closed system with a large drainage tank. Additionally, the guides have been equipped with carbide, which translates into greater accuracy in serial cutting. Main advantages of the machine are: a rotating arm from -45º to 60º (rotatable in two directions), a new generation hydraulic cylinder, a more powerful 1.5 kW 400V motor, a more efficient cooling system. The machine is equipped with a tension spring and a fast vise clamp. Bearing guides ensure reliable and even guidance of the tape in the material being cut. In addition, there are mounted at the bearings, carbides which improve accuracy in serial cutting. A big plus is the cooling of the cutting belt placed directly on the guide. Hydraulic cylinder with stepless adjustment of the arm descent, facilitates more accurate adjustment of the speed to the material being cut. SPECIFICATION: The belt cutter type STILER G5025 allows cutting in a plane perpendicular to the axis of the material being cut or at any angle from -45 to +60 degrees. The cut piece can be fed manually or through any feeding device. The operator starts the machine by pressing the start button and sets the cutting speed. When the cut is completed, the machine automatically stops and the operator raises the arm manually to the start position. This model has its uses in unit production and small batch production, and because of its strong construction, it can cut a wide range of materials, including stainless steel, tool steel, solid materials and profiles. The machine allows angular cutting of the material, by rotating the arm to the left and right. The advance during cutting is carried out by gravity on the principle of oil flow in a two-chamber hydraulic cylinder. The appropriate speed of descent of the arm is achieved by a valve that regulates the flow of oil between the chambers. The blade guides are equipped with hard metal carbide plates and a rolling bearing system. It is the Sintered Carbide guides that are responsible for the precision and straightness of the cut. Massive, stable and refined construction and arm made of uniform cast iron provides the machine with very high rigidity and stability when cutting, which ensures precision cutting and long trouble-free operation. The construction as well as the use of a cutting belt with a width of 27 mm, makes it fully possible to perform multi-series cutting of both profiles and full details. The cutting speed is regulated by a hydraulic cylinder. The machine is equipped with a tension spring and a quick vise clamp. Included is a roller feeding the material to be cut and a bumper for the length of the material to be cut. The feed speed is adjustable on the control panel of the cutting machine. There is a choice of two cutting belt speeds of 36 and 72 m/min. In the lower position of the arm ( after the material has been cut), the cutting belt drive and cooling system is switched off automatically. Safety will be ensured by cutting belt guards and micro switches that stop engine operation when the cutting cycle is completed or when any of the guards are opened, an additional safety feature is the automatic shutdown of the cutting machine in case the cutting belt breaks. The motor is equipped with new generation thermal fuses. The base is built as a rigid body welded from steel sheets. Inside, there is a separate coolant tank with an electro-pump and a large drainage sump. The design of the upper part of the base provides a sump for draining coolant and catching chips generated during material cutting. The drive from the motor to the belt drive wheel is transferred by a maintenance-free worm gear. The machine is equipped with a coolant tank with an electro-pump Technical data Model: G5025 Power: 1.5 kW Power supply: 400V, 3 phases Cutting belt size: 2710x27x0.9 mm Regulation of arm descent: Hydraulic cylinder Belt linear speed: 36/72 m/min Distance of vise base from ground 765 mm Dimensions: 1055 x 745 x 1850 mm Weight: 350 kg Cutting Range Angle TUBE PROFILE CADRAT 0º ø250 310 x 210 240 x 240 45º (Right) ø200 200 x 140 180 x 180 45º(Left) ø150 170 x 90 150 x 150 60º(Right) ø120 120x95 100x100 A video of the machine in operation.