STILER BS 712R band saw machine

Band saw machine STILER BS 712 R NEW POWERFUL MODEL! Only with us the original, reinforced version of the belt cutter STILER BS712R. WITH COOLING SYSTEM AND ELECTRRO-POMPAGE. THE BAND CUTTING MACHINE HAS A ROTARY ARM FOR CUTTING AT A 45° ANGLE The main difference of the 712R model compared to the 712N is a rotary arm for angle cuts. Thanks to this solution, we can quickly and easily change the cutting angles without having to maneuver long material and rearrange the infeed / outfeed tables. Powerful brushless motor 750 W, 400V. Ensures long and trouble-free operation. The cutter can easily handle thick workpieces and bundle cuts. Drive is transmitted via a powerful worm gearbox. Variable cutting belt speed allows you to adjust the machine to suit the material being cut. Belt wheels allow you to change the belt speed to: 34 / 41 / 59 / 98 m/min. High-end hydraulic actuator allows stepless adjustment of the arm's descent speed and its stopping at any time. Massive vise allows us to cut up to 305 mm wide. Additionally, the machine is equipped with a quick clamping device that makes it easier to press the vise against the material being cut. The set includes a bumper for the material being cut. Safety during the cutting process is ensured by an electrical system that meets all CE requirements. The machine has a limit switch stopping the machine after finishing the cutting process, an emergency switch so-called "safety mushroom", a number of micro-switches turning off the machine when, for example: we open the belt transmission cover or the cutting belt cover. The 712R cutting machine is equipped with an electrical box. Machines without electrical boxes, without overload and thermal protection are subject to frequent failures. Please pay attention to this when choosing a model and supplier. Belt guides have been equipped with 10 bearings responsible for straightness of cutting . Additionally, our model, unlike the competition, has a brush that cleans the cutting belt of chips. It prevents clogging of the blade and gives a more efficient cut. Cooling is done directly on the guide. Thanks to the collection sump, the coolant is returned back to the tank, working with cooling is practically lossless. The tank with the electropump is located in the base of the machine. Thanks to easy access, we can quickly refill or replace the coolant. A vertical cutting work table is attached to the machine. This solution allows us to cut wood and metal vertically as in vertical saws. The cutter has the ability to adjust the vise stand to get a wider cutting width up to 305 mm. The bumpers make it easy to set the most needed cutting angles without the need for exact measurement each time the arm is repositioned. Thanks to the vertical position, changing the cutting belt is fast and convenient. The arm is made of uniform cast ductile iron. The arm is made of uniform cast ductile iron. Specifications Model: BS 712R Power: 750W Power supply: 400V, 3 phases Cutting belt size: 2360x20x0.9 mm Adjustable arm drop: Hydraulic cylinder Belt linear speed: 34/41/59/98 m/min Vise base distance 650 mm Dimensions: 1200x700x1100 mm Weight: 230 kg Cutting range Angle TUBE PROFILE CADRAT 0º ø180. 210 x 180 / 300 x 180 (with vise adjusted) 180 x 180 45º ø140 140 x 90 90x90.